PDA

View Full Version : Works Bell Products Now Available



thetunersgroup
08-09-08, 06:54 AM
Hi All,

Following up on our announcement that we have been appointed as Works Bell's exclusive Australian distributor (see http://forum.jdmstyletuning.com/showthread.php?t=10638 ) this weekend we opened the Works Bell section of our site.


PRICES NEVER BEFORE SEEN IN AUSTRALIA

As you can see, we've kept our promise on pricing - our ex tax retail prices are identical to the prices that Works Bell's products sell for in Japan.

So Australian customers can now get Works Bell products at ex-tax prices that are identical to what you'd pay if you lived in Japan - without the cost of an air fare to Tokyo :)

Unfortunately there is no way around GST, so the Australian government puts their hand out for 10% on sales to customers in Australia, but we believe that our pricing is the lowest everyday prices that Works Bell products have ever been available for in Australia.

And of course by by purchasing from us, because we are Works Bell's official exclusive Australian distributor you are 100% guaranteed of getting the real deal, genuine Works Bell products.


THE TUNERS GROUP'S AUSTRALIAN PRICING POLICY

In terms of our pricing policies, as I said when we released the Forced Ignition system in Australia ...


"One of our primary business goals is not just to provide high quality, innovative products, but to provide those products to our customers at prices that are not inflated by multiple layers of exporters, importers and distributors."

"We are supplied with Forced Ignition systems directly by the manufacturer in the US, and we work hard to 'cut the fat' from our supply chains."

"The end result is that we are able to supply high quality, highly innovative products like the Forced Ignition Immobilizer to our customers at the previously unseen innovative prices we are announcing today."

"For too long, customers in Australia have been forced to pay large markups on products made outside of Australia. With our new pricing on the high quality Forced Ignition system, we currently have the lowest pricing of any retailer in the world - online or offline."


AVAILABILITY AND HOW TO ORDER

There are a few products we are still adding to our ordering system, but the bulk of Works Bell's major products like the Rapfix II Quick Release, the tilting Rapfix GTC-R quick release, the Team Orange and Yoshioka Collaboration edition versions of the Rapfix II etc are all now online and available for purchase.

You can view the Works Bell section of our site at ...

http://www.tunersgroup.com/Products/Works_Bell.html

Scroll down that page to the products section and each product has a link to purchase online.

- Adam

jarms
08-09-08, 02:19 PM
I'm getting an Internal Server Error when trying to access the below link ...

http://www.tunersgroup.com/Products/Works_Bell.html
and this one too
http://www.tunersgroup.com/Products/

jugo
08-09-08, 04:32 PM
Works Bell "U-Turn" Airbag Warning Cancellation Harness

Does this device come with the boss kits?

Or Can this device be brought separately?

thetunersgroup
09-09-08, 03:26 AM
I'm getting an Internal Server Error when trying to access the below link ...

http://www.tunersgroup.com/Products/Works_Bell.html
and this one too
http://www.tunersgroup.com/Products/

Hi Jarms,

Our ISP was doing some server maintenance earlier and they changed a setting while they were doing maintenance, which is why you got that error. It's fixed now and both pages are working just fine.

If you get that error message again, just wait a couple of minutes and try again. Our system is smart enough that if a server error occurs it won't hang indefinitely.

- Adam

thetunersgroup
09-09-08, 03:37 AM
Works Bell "U-Turn" Airbag Warning Cancellation Harness

Can this device be brought separately?

Yes it's sold separately. Price is just AU$9.80 inc GST.

There are two different types - one with a male connector, one with a female connector.

If you can let us know the month and year build date of your car, and exact model of your car, we can ensure you get the right one for your car.

- Adam

Hens
12-09-08, 05:04 PM
Whilst I was drooling over the Works Bell products on your website and on the Japanese homepage I noticed ... on the Works Bell Japan site it shows that the Original WB steering is made in China. Could you fill us in?
http://www.worksbell.co.jp/en/products/wb_original/index.htm

cheers
Henry

thetunersgroup
12-09-08, 08:04 PM
Whilst I was drooling over the Works Bell products on your website and on the Japanese homepage I noticed ... on the Works Bell Japan site it shows that the Original WB steering is made in China. Could you fill us in?
http://www.worksbell.co.jp/en/products/wb_original/index.htm

cheers
Henry

Hi Henry,

Thanks for the heads up.

Production of the Works Bell Original Steering Wheel and Yoshioka Steering Wheel is currently being done in China. Works Bell in Japan's website has been recently updated with this info. As I understand it, those two steering wheels are currently made in China to Works Bell's specifications, shipped to Japan, then Works Bell engineers put them through Japanese quality control to ensure that the quality is up to Works Bell's standards.

These are the two steering wheels I am talking about ...

http://www.tunersgroup.com/images/gallery/gallery309.jpg

http://www.tunersgroup.com/images/gallery/gallery305.jpg

Manufacturing of the Works Bell Original Steering Wheel and Yoshioka Steering Wheel is being done in China to make those two steering wheels more affordable as there had been a lot of demand from customers for lower pricing on Works Bell steering wheels.

So it is done in order to provide customers with lower pricing on the Works Bell Original Steering Wheel and Yoshioka Steering Wheel. Works Bell listened to their customers and came up with a way to provide what customers wanted, without sacrificing quality.

I have a Works Bell Original steering wheel and the quality is fantastic - it is of a very high quality. The synthetic leather used is not like any synthetic I have ever seen before. It is soft and supple, with high quality stitching - a great bit of gear. Works Bell simply won't put their name to any product unless it meets their extremely high quality standards.

The Team Orange Steering Wheel is made in Italy for Works Bell by Italvolanti. This is stated at http://www.worksbell.co.jp/en/products/collabo/index.htm

This is the Italian made Team Orange Steering Wheel ...

http://www.tunersgroup.com/images/gallery/gallery307.jpg

http://www.tunersgroup.com/images/gallery/gallery306.jpg

As far as I know, all Works Bell's other products are made in Japan.

We will update all the Works Bell product pages next week with info on where each individual product is made.

- Adam

Hens
13-09-08, 03:18 AM
Cheers Adam for the quick followup.
This is amazing value.

Ill have to let the peoples know about this one.

thetunersgroup
16-09-08, 05:42 PM
Production of the Works Bell Original Steering Wheel and Yoshioka Steering Wheel is currently being done in China. Works Bell in Japan's website has been recently updated with this info. As I understand it, those two steering wheels are currently made in China to Works Bell's specifications, shipped to Japan, then Works Bell engineers put them through Japanese quality control to ensure that the quality is up to Works Bell's standards...

As far as I know, all Works Bell's other products are made in Japan.

We will update all the Works Bell product pages next week with info on where each individual product is made.

- Adam

We have just received this from Works Bell in Japan ...

--------
"Addressing to your questions, we are very sure that all our products are made in Japan except the steering wheel ...

Other products of our company are all made in Japan.

And we do not have plans to manufacture products in China or other countries for our further business.

Please explain this to your customers."
--------

- Adam

thetunersgroup
19-10-08, 09:47 PM
http://www.tunersgroup.com/images/large/large295.jpg
http://www.tunersgroup.com/images/large/large178.jpg

http://www.tunersgroup.com/images/large/large296.jpg

Hi all, we also now have the Works Bell Paddle Shifter Kits available. See this post for more info ..

http://forum.jdmstyletuning.com/showthread.php?t=12633

- Adam

thetunersgroup
31-10-08, 08:40 PM
Hi All,

We now have the Works Bell Toshiki Yoshioka ToshiKing Gear Knobs available as fitted to Yoshioka's AE86 D1GP car ...

http://www.tunersgroup.com/images/large/large437.jpg

This is a photo of the ToshiKing Gear Knobs ...

http://www.tunersgroup.com/images/large/large254.jpg

http://www.tunersgroup.com/images/large/large321.jpg

More info is at ...

http://forum.jdmstyletuning.com/showthread.php?t=12859

- Adam

black200
06-12-08, 11:04 PM
do you guys do a steering wheel spacer that i can use with my stock toyota wheel so i get 20-30mm more reach but keep airbag?

thetunersgroup
07-12-08, 01:35 AM
do you guys do a steering wheel spacer that i can use with my stock toyota wheel so i get 20-30mm more reach but keep airbag?

If the steering wheel incorporates splines which engage with the steering column, you can't space the wheel towards the driver because you need the full factory stock engagement depth of the splines. You also need full factory stock thread engagement depth of the nut that holds the steering wheel to the steering column, and full factory stock engagement of the connectors for the airbag and horn.

The question of it is possible at all would depend on a lot of factors, including ensuring that the connections to the airbag are retained and the horn connections are retained, and checking if it is legal to so in terms of ADR's etc, so I can't give you a definite answer about if it's technically possible without seeing the steering wheel and how it mounts, and you'd need to talk to an engineer who is familiar with the relevant ADR's and state standards in your state in terms of it can be done within the ADR's and local rules.

Does the stock wheel mount to a boss kit or is the steering wheel attached directly to the steering column ?

This is a photo of one of Works Bell's aluminium spacers ...

http://www.tunersgroup.com/images/large/large192.jpg

Works Bell make them in lengths of 10mm, 15mm, 20mm, 25mm, 30mm.

Works Bell also makes a steering wheel spacer called the Rivet Spacer ...

http://www.tunersgroup.com/images/large/large191.jpg

The rivet spacers come in 11 sizes and different lengths from 50mm-100mm in 5mm increments, and total length of 110mm, 120mm, and 130mm.

- Adam

Beau
08-12-08, 09:08 AM
i could be blind here but how much is the above 'rivet spacer'?

thetunersgroup
08-12-08, 07:04 PM
i could be blind here but how much is the above 'rivet spacer'?

Nah mate, you're not blind - we haven't added them to our ordering system yet. We tend to add some products when people want to order them, so if you want one, let me know what spacer length you want and we'll add it to our ordering system.

We also need to add the Works Bell Subaru Legacy parts, which are some super nice gear that not many people know about. Works Bell's Subaru Legacy parts range includes ...

http://www.worksbell.co.jp/en/products/legacy_option/images/op_03.jpg

Single Turbine Kit for BH
Price ¥586,950

http://www.worksbell.co.jp/en/products/legacy_option/images/op_04.jpg

6POT CALIPER KIT for BH/BE
Price ¥249,900

http://www.worksbell.co.jp/en/products/legacy_option/images/op_05.jpg

BILSTEIN Car Height Adjustment KIT for BH/BE
Price ¥207,900

http://www.worksbell.co.jp/en/products/legacy_option/images/op_07.jpg

Clutch Fluid Cap
Regular Price ¥4,725

-Brake Fluid Cap
Price ¥4,725

http://www.worksbell.co.jp/en/products/legacy_option/images/op_13.jpg

Carbon Look Shift Boots for Manual and auto's
Regular Price ¥6,510

http://www.worksbell.co.jp/en/products/legacy_option/images/op_15.jpg

Carbon Look Side Brake Boots
Regular Price ¥6,300

More info on the Legacy parts are at ...

http://www.worksbell.co.jp/en/products/legacy_option/index.htm


RIVET SPACER PRICES

http://www.tunersgroup.com/images/large/large191.jpg

The rivet spacers vary in price depending on spacer length. They start at 50mm, and go up to 130mm in 5mm increments.

The shortest rivet spacer is 50mm and retails in Japan for Japanese Yen 5,800 (we sell them in Australia at the same price as they retail for in Japan).

The 75mm model is Japanese Yen 8,250

The 100mm model is Japanese Yen 9,800

The 130mm model is Japanese Yen 11,500

Our Works Bell price list also lists a "Special" length rivet spacer with a price of 12,000 yen. I assume that means that they can do a custom length if required.

Here's a couple of photos of a rivet spacer attached to a Works Bell Rapfix II quick release on one of our display stands ...

http://www.tunersgroup.com/images/large/large596.jpg

http://www.tunersgroup.com/images/large/large594.jpg

http://www.tunersgroup.com/images/large/large593.jpg

Those photos are from our "Enduro System" page. More info on the Enduro System is here ...

http://www.tunersgroup.com/The_Enduro_System.html

- Adam

Beau
08-12-08, 08:45 PM
now im interested. i'll pm you tomorrow mate

thetunersgroup
11-12-08, 07:42 PM
Hi All,

Both the Works Bell Rapfix II Quick Release and Works Bell Toshiki Yoshioka ToshiKing Shift Knob shown below are now on sale in our pre-xmas "Save A Truckload Sale" :)

http://www.tunersgroup.com/images/large/large280.jpeg

http://www.tunersgroup.com/images/large/large254.jpg

http://www.tunersgroup.com/images/large/large178.jpg

Click here for details ...

http://www.tunersgroup.com/xmas08.html

- Adam

thetunersgroup
05-06-09, 06:28 AM
Hi All,

For a very limited time we are having a special sale on the Works Bell Rapfix II Quick Release.

Our special sale price is WELL BELOW JAPANESE RETAIL PRICES :)

Please see this thread for more info ...

http://forum.jdmstyletuning.com/showthread.php?t=16787

- Adam

thetunersgroup
10-06-09, 12:41 PM
Hi All,

2 brand new versions of the Rapfix II have just been announced.

See this thread for more info and photos ...

http://forum.jdmstyletuning.com/showthread.php?t=16890

- Adam

thetunersgroup
14-08-09, 04:13 AM
Hi All,

The Tuners Group is very pleased to announce special sale pricing on our full range of Works Bell Paddle Shifter NEO kits.

Works Bell Paddle Shifter Kits are available for a range of models of vehicles from Subaru, Lexus, Toyota, Nissan and Mazda.

Please see this thread for more info ...

http://forum.jdmstyletuning.com/showthread.php?t=18228

- Adam

2jzeee
13-04-10, 10:57 AM
after boss/hub kit for a 1993 FD rx7.

Non air bag, no cruise.

Its for a race only car, so anything will do really.

Do you have in stock, and what is your location in sydney?

thetunersgroup
13-04-10, 05:46 PM
after boss/hub kit for a 1993 FD rx7.

Non air bag, no cruise.

Works Bell makes both standard length and short bosses for the FD3S RX7.

The standard length bosses for FD3S are here ...

http://www.tunersgroup.com/Online_Store/rx7_fd3s_boss.html

The short bosses for FD3S are here ...

http://www.tunersgroup.com/Online_Store/FD3S_short_boss.html

- Adam

2jzeee
13-04-10, 06:08 PM
Do you have in stock, and what is your location in sydney?

and the other part of the question? or can you send me a pm?

thetunersgroup
14-04-10, 03:51 AM
and the other part of the question? or can you send me a pm?

Please send us an email to the email address listed here so that we can check on current availability etc and let us know in that email if you want a short boss or standard length boss ...

http://www.tunersgroup.com/Contact_Us/

As mentioned on that page ...


If you are contacting us by email about Works Bell steering boss kits, or any other model specific parts, please advise in your email:

The month and year build date of your car
The exact model of your car
If your car was equipped with an airbag ex-factory
What kind of transmission your car is equipped with
If your car's factory steering wheel has cruise control buttons mounted to the factory steering wheel

Thanks,
Adam

thetunersgroup
22-04-10, 12:06 AM
Hi All,

Works Bell has announced this week that once their current stock of various Works Bell Team Orange and Toshiki Yoshioka ToshiKing collaboration products is sold, these collaboration products will no longer be available.

Items that will no longer be available include:

- Works Bell Rapfix II Quick Release - Team Orange Collaboration Version
- Works Bell Rapfix II Quick Release - Toshiki Yoshioka Toshiking Collaboration Version
- Works Bell Special Edition Toshiki Yoshioka Toshiking Steering Wheel

Stock is extremely limited on some of these items, so if you want one before the final stock is sold, you need to be very quick.

Orders will be processed strictly in the order that payment is received.

See this thread for more info on the items that will no longer be available ...

http://forum.jdmstyletuning.com/showthread.php?t=24310

- The Tuners Group

bogiy
12-06-10, 12:16 AM
do u have a bost kit and pedal shift for honda GE8??

PM me please if u have the product

thx

thetunersgroup
15-06-10, 12:07 AM
do u have a bost kit and pedal shift for honda GE8??

PM me please if u have the product

thx

Yes we have a customer who has fitted one to a Honda Fit / Jazz GE8.

Here's a photo of one installed in a Fit / Jazz ...

http://www.tunersgroup.com/images/gallery/gallery998.jpeg

A short boss is also available for the GE8.

Please send us an email to the email address listed here for more info ...

http://www.tunersgroup.com/Contact_Us/

- The Tuners Group

bogiy
15-06-10, 12:29 AM
how much for the pedal shift it self..

do u have non carbon pedal shift??

thx

thetunersgroup
15-06-10, 06:40 PM
how much for the pedal shift it self..

do u have non carbon pedal shift??

thx

As mentioned above, Please send us an email to the email address listed here for more info ...

http://www.tunersgroup.com/Contact_Us/

- The Tuners Group

nilprapai
15-06-10, 08:26 PM
Hi, can you get booskit to suit MY99 wrx? (airbag steering wheel)

Cheers

thetunersgroup
20-06-10, 11:19 PM
Hi, can you get booskit to suit MY99 wrx? (airbag steering wheel)

Cheers

Yes you can find that boss here (there is a pulldown menu for each model at the top of this page) ...

http://www.tunersgroup.com/Online_Store/impreza_wrx_boss.html

- The Tuners Group

thetunersgroup
20-09-10, 03:13 PM
do u have a bost kit and pedal shift for honda GE8??

PM me please if u have the product

thx

Hi Bogiy,

The Paddle Shifter for the GE8 was announced today on JDMST. See this thread for info ...

http://forum.jdmstyletuning.com/showthread.php?t=28301

- Adam

Harthorn
22-11-10, 08:53 PM
hey mate, would like to ask the sizes listed on your website

i.e. works bell original steering wheel 350mm

is this measured from on wheel edge? outer diameter correct?

BOX
23-11-10, 01:56 AM
can you please PM me if you have a boss kit for a 180sx & the price. thanks.

bushtucker
23-11-10, 05:37 AM
Adam can you pm me best price for nardi suede 350, works bell rapix and boss kit for a jza80. Thanks

Harthorn
23-11-10, 11:10 PM
also a question, i'm eyeing the KEY'S Racing steering wheel at the moment, and it says it requires a boss kit to fit.. would the works bell rapfix ii quick release be suitable in that case??

car is 2005 wrx wrp10 impreza

thetunersgroup
24-11-10, 02:33 PM
also a question, i'm eyeing the KEY'S Racing steering wheel at the moment, and it says it requires a boss kit to fit.. would the works bell rapfix ii quick release be suitable in that case??

car is 2005 wrx wrp10 impreza

Hi Harthorn,

http://www.tunersgroup.com/images/large/large185.jpg

Works Bell make standard length and short bosses for Impreza's. The short bosses for Impreza's are here ...

http://www.tunersgroup.com/Online_Store/impreza_wrx_short_boss.html

http://www.tunersgroup.com/images/large/large373.jpeg

The quick release then bolts to the short boss as shown in the photo above (optional Works Bell Flipper also shown above).

At the steering wheel end where the steering wheel bolts to the quick release, the Rapfix II quick release ships pre-machined with bolt holes in both standard 6 bolt Momo bolt pattern steering (PCD 70mm), and 6 bolt Nardi bolt pattern (PCD 74mm).

Dimensions and more info on the Rapfix II Quick Release is here ...

http://www.tunersgroup.com/Online_Store/Works_Bell_Rapfix_II_Steering_Wheel_Quick_Release. html

I can't remember what bolt pattern the Key!s steering wheels use, but if you contact JDM Concept they should be able to tell you what the bolt pattern is on the Key!s Steering Wheel - like us they are a sponsor of JDMST too. JDM Concept have the Key!s steering wheel listed here ...

http://www.jdmconcept.com.au/index.php?option=com_jdm&p=brands&brands=20

The optional Works Bell Flipper is here ...

http://www.tunersgroup.com/Online_Store/Works_Bell_Flipper_For_Rapfix_II_Quick_Release.htm l

http://www.tunersgroup.com/Online_Store/rapfix_flipper_yellow.html

- Adam

thetunersgroup
24-11-10, 08:31 PM
can you please PM me if you have a boss kit for a 180sx & the price. thanks.


Adam can you pm me best price for nardi suede 350, works bell rapix and boss kit for a jza80. Thanks

Hi guys,

There are various different models of bosses for the 180 SX and the JZA80 ...


180SX bosses ...

http://www.tunersgroup.com/Online_Store/180sx_boss.html

http://www.tunersgroup.com/Online_Store/180sx_short_boss.html

JZA80 bosses ...

http://www.tunersgroup.com/Online_Store/JZA80_supra_short_boss.html

http://www.tunersgroup.com/Online_Store/supra_boss.html

For any boss order we need various info about your car to ensure the correct part number is supplied.

Please send us an email to the email address listed here. The info we need about your car is listed here ...

http://www.tunersgroup.com/Contact_Us/

We don't use the PM system as it is very difficult for us to keep track of which enquiries have been replied to via PM so email is the best option for enquiries like these.

- Adam

Harthorn
25-11-10, 08:11 PM
thanks mate! very helpful

thetunersgroup
19-01-11, 11:42 AM
http://www.tunersgroup.com/images/gallery/gallery2177.jpg

Hi All,

The Tuners Group is very pleased to announce a new Orange version of the Works Bell Rapfix II.

The new version replaces the old Works Bell Team Orange Collaboration Version Rapfix II Quick Release. The old Works Bell Team Orange Rapfix II Quick Release was a collaboration version which is no longer manufactured and which sold out months ago.

The difference between the new version and the old version is that the old version had a Team Orange logo and the new version has a Works Bell logo.

The new version can be ordered now from The Tuners Group. The first batch will begin shipping as soon as they roll out of Works Bell's factory in Japan in mid-February.

If you want to be one of the first to own this new product, please get your order in early so that we can reserve one for you from the first batch.

We ship worldwide. Click here to order yours ...

http://www.tunersgroup.com/Online_Store/Works_Bell_Rapfix_II_Steering_Wheel_Quick_Release. html

- Adam

TaKz
30-01-11, 10:53 PM
i'm looking at the normal length boss kit to suit a 1997 R33 GTS-T airbag and hicas

thetunersgroup
25-05-11, 10:27 PM
i'm looking at the normal length boss kit to suit a 1997 R33 GTS-T airbag and hicas

Hi Takz,

You can find the standard length R33 bosses here ...

http://www.tunersgroup.com/Online_Store/r33_boss.html

And the R33 short bosses are here ...

http://www.tunersgroup.com/Online_Store/r33_short_boss.html

- The Tuners Group

thetunersgroup
25-05-11, 10:29 PM
WORKS BELL RAPFIX II STEERING WHEEL QUICK RELEASE PRICE DROP

http://www.tunersgroup.com/images/large/large319.jpg

Hi all,

Due to the current strength of the dollar against the Japanese Yen, we are passing on the savings and have lowered our retail prices today on the world renowned Works Bell Rapfix II Quick Release.

Prices on all colour versions of the Rapfix II have been reduced.

If you find the Rapfix II in stock and ready to ship at a lower price anywhere worldwide, let us know and we'll see if we can beat any competing price for you.

http://www.tunersgroup.com/images/large/large338.jpg

http://www.tunersgroup.com/images/large/large1015.jpg

Made in Japan, this is the genuine real deal ball lock quick release, invented by Works Bell and using Works Bell's patented ball locking system technology.

http://www.tunersgroup.com/images/large/large2177.jpg

Click here to learn how the Works Bell Rapfix II is manufactured and why there is no substitute for the genuine made in Japan product ...

http://www.tunersgroup.com/How_To_Select_A_Steering_Quick_Release_%26_How_The _Works_Bell_Rapfix_II_is_made.html

We ship worldwide. You can order a Rapfix II for your car here ...

http://www.tunersgroup.com/Online_Store/Works_Bell_Rapfix_II_Steering_Wheel_Quick_Release. html

- The Tuners Group

dupac
08-06-11, 09:43 PM
hey man i have an EK4 (1998 model Civic VTiR), i was looking for a works bell boss kit to fit my Nardi Deepcorn 330mm steering wheel.
http://www.tunersgroup.com/Online_Store/wb_honda_civic_crx_short_boss.html

i have afew questions.......

- i checked out that one i assume thats the one to fit the EK spline?
- that's the boss kit im after do i need the converter so that i can fit the nardi wheel? as i understand the NARDI 6 holes is differently spaced from the works bells 6 holes.. if you so sell this howmuch?
- i also need the Airbag delete light thing to.. howmuch extra?

you can pm me with your reply if you want.. and total price of the above shipped to NSW 2170

thetunersgroup
09-06-11, 09:23 PM
hey man i have an EK4 (1998 model Civic VTiR), i was looking for a works bell boss kit to fit my Nardi Deepcorn 330mm steering wheel.
http://www.tunersgroup.com/Online_Store/wb_honda_civic_crx_short_boss.html

i have afew questions.......

- i checked out that one i assume thats the one to fit the EK spline?
- that's the boss kit im after do i need the converter so that i can fit the nardi wheel? as i understand the NARDI 6 holes is differently spaced from the works bells 6 holes.. if you so sell this howmuch?
- i also need the Airbag delete light thing to.. howmuch extra?

you can pm me with your reply if you want.. and total price of the above shipped to NSW 2170

Hi dupac,

The Works Bell airbag warning cancellation harness is included at no extra cost with the short boss.

For the EK Civic there are multiple versions of the boss, so please send us an email to the address listed here and we will help you identify which version of the boss you need for your car and go through the bolt pattern options with you ...

http://www.tunersgroup.com/Contact_Us/

- The Tuners Group