PDA

View Full Version : YOUR WHEEL OFFSETS & SIZES >Post Here



D CUPS
05-09-07, 02:01 PM
Hey guys, found this on another forum, thought it would be great to put here considering the different amounts of car manufacturer rides on this forum.
It will give you an idea of what fits, what can fit and what to do to make it fit.

CAR MODEL = MazdaSpeed GT-Concept RX-7

WHEEL DIAMETER = 19" Front, 19" Rear

WHEEL WIDTH = 8" Front, 10" Rear (Old setup - revealing my new setup later:mrgreen: )

WHEEL OFFSET = +24 Front, +11 Rear

TYRE SIZE = 235/35 Front, 265/30 Rear

SPACERS = None

MODIFICATIONS TO FIT = Fronts: Rolled front guards, trimmed splash guards, trimmed sideskirts, Mazdaspeed Coilovers setting on Hard, -3 Camber,
Rears: Rolled, Flared 10mm rear guards, MazdaSpeed Coilovers setting on Hard, -3 Camber

RIM TYPE = Tanabe SSR Professor SP1
http://usera.imagecave.com/djchesta/DSCF1125.jpg
http://usera.imagecave.com/djchesta/DSCF1126.jpg

POST YOUR SPECS!

phillb
05-09-07, 02:52 PM
Good Idea

CAR MODEL = Nissan R33 Skyline Sedan

WHEEL DIAMETER = 17" Front, 17" Rear

WHEEL WIDTH = 8" Front, 9" Rear

WHEEL OFFSET = +12 Front, +12 Rear

TYRE SIZE = 235/45 Front soon to be 225/45 for stretched goodness, 235/45 Rear

SPACERS = None

MODIFICATIONS TO FIT = None at the moment but plans are Fronts to be rolled
Rears: Roll and Flare 15mm VIP style FTW,

RIM TYPE = Works Revax Meshies

Pics:
http://i167.photobucket.com/albums/u134/phillb57/R33%20sedan/RearWorksDish.jpg

http://i167.photobucket.com/albums/u134/phillb57/R33%20sedan/DsiderearWorks.jpg

VTECMACHINE
05-09-07, 03:01 PM
CAR MODEL = Honda Integra Type R (DC2)

WHEEL DIAMETER = 16" front and rear

WHEEL WIDTH = 7" front and rear
WHEEL OFFSET = +40 offset front and rear

TYRE SIZE = 205/45/R16

SPACERS = None

MODIFICATIONS TO FIT = None

RIM TYPE = Rays CE28N (Bronze)

Eddie
05-09-07, 03:10 PM
CAR MODEL = 07 Honda Jazz

WHEEL DIAMETER = 15 F & R

WHEEL WIDTH = 7" Front, 7" Rear

WHEEL OFFSET = +35 F & R
TYRE SIZE = 195/50 F & R

SPACERS = None

MODIFICATIONS TO FIT = rolled rear guard, abit of rear bumper trimming

RIM TYPE = desmond regamaster evo

llama_au
05-09-07, 04:52 PM
CAR MODEL = 1998 Nissan Pulsar N15 S1 LX Sedan

WHEEL DIAMETER = 16" front and rear

WHEEL WIDTH = 7" front and rear

WHEEL OFFSET = +35mm front and rear

TYRE SIZE = 205/45/R16 front and rear

SPACERS = +5mm on front to clear the bottom of the calipers

MODIFICATIONS TO FIT = None

RIM TYPE = Watanabe Racing

j0nbubz
05-09-07, 05:38 PM
CAR MODEL = Nissan S15 Spec-R

WHEEL DIAMETER = 18" Front, 18" Rear

WHEEL WIDTH = 8.5" Front, 9.5" Rear

WHEEL OFFSET = +32 Front, +38 Rear

TYRE SIZE = 235/45 Front, 265/35

SPACERS = 5mm front

MODIFICATIONS TO FIT = Adjustable front castors, Rolled guards (not required, but car is heavily lowered on coilovers)

RIM TYPE = Work Emotion CR KAI - Bronze

Gorilla
05-09-07, 06:20 PM
Good thread.


TRACK
CAR MODEL = SW20 MR2 Turbo

WHEEL DIAMETER = 17" Front, 17" Rear

WHEEL WIDTH = 7" Front, 8" Rear

WHEEL OFFSET = +35 Front, +35 Rear

TYRE SIZE = 225/45 Front, 235/45 Rear

SPACERS = None

MODIFICATIONS TO FIT = Fronts: Rolled front guard, Rears: Rolled,

RIM TYPE = Advan Tri Spoke


STREET
CAR MODEL = SW20 MR2 Turbo

WHEEL DIAMETER = 17" Front, 17" Rear

WHEEL WIDTH = 7.5" Front, 8.5" Rear

WHEEL OFFSET = +35 Front, +35 Rear

TYRE SIZE = 235/40 Front, 255/40 Rear

SPACERS = None

MODIFICATIONS TO FIT = Fronts: Rolled front guard, Rears: Rolled,

RIM TYPE = Work Mesiter S1

Project1JZ
11-09-07, 11:17 PM
CAR MODEL = JZZ30 Soarer

WHEEL DIAMETER = F/R:19"

WHEEL WIDTH = F:8.5", R:9.5"

WHEEL OFFSET = F/R: +41mm Std-Disk

TYRE SIZE = F:235/35, R:265/30

SPACERS = None

MODIFICATIONS TO FIT = F/R: Rolled guards (not needed up front though)

RIM TYPE = Trafficstar RTS



Yeah it's alright, I suppose.

EGG80X
11-09-07, 11:21 PM
pics or ban ppl!!!!

Trolls Royce
12-09-07, 02:44 AM
CAR MODEL = R32 GTR

WHEEL DIAMETER = F/R:18"

WHEEL WIDTH = F:9", R:9"

WHEEL OFFSET = F/R: +20

TYRE SIZE = F:255/40/17

SPACERS = None

MODIFICATIONS TO FIT = F/R: None

RIM TYPE = BBS LM



CAR MODEL = Mazda RX7

WHEEL DIAMETER = F/R:17"

WHEEL WIDTH = F:9", R:9"

WHEEL OFFSET = F/R: +17

TYRE SIZE = F:215/40, R:235/45

SPACERS = None

MODIFICATIONS TO FIT = F/R: Guards look to have been hammered to within an inch of their life

RIM TYPE = Buddy Club P1/Desmond Regamaster/BBS LM

wilch
12-09-07, 08:22 AM
This thread would be much better with pics of the rims on the cars. You know, just so we can see what the fitment is like.

kawasaki
12-09-07, 11:18 AM
CAR MODEL = 1990 Honda Civic

WHEEL DIAMETER = 15" Front, 15" Rear

WHEEL WIDTH = 6.5" Front, 6.5" Rear

WHEEL OFFSET = +20 Front, +20 Rear

TYRE SIZE = 195/50 or something

SPACERS = None

MODIFICATIONS TO FIT = Roll and Flare rear, add some camber, just cleared caliper

RIM TYPE = SSR Reverse Mesh

Sp33dY
12-09-07, 11:26 AM
CAR MODEL = 2006 Lancer Wagon / Sedan

WHEEL DIAMETER = 15" Front, 15" Rear

WHEEL WIDTH = 6.5" Front, 6.5" Rear

WHEEL OFFSET = +46 Front, +46 Rear

TYRE SIZE = 195/55

SPACERS = None

MODIFICATIONS TO FIT = NONE

RIM TYPE = Steel 'Interceptors' :)

Spools
12-09-07, 11:57 AM
Car Model ; r32 skyline gtst

Wheel Width ; 8.5 front , 9.5 rears

Wheel Offset ; +21 front / rear

Tyre size ; 235/40 / 275/40

Spacers ; none

Modifications ; 20mm front fenders and Flared Out rears about 25mm

Rim Type ; RacingHart CR

gimic
12-09-07, 11:57 AM
CAR MODEL = EF8 CRX

WHEEL DIAMETER = 15" Front, 15" Rear

WHEEL WIDTH = 6.5" Front, 6.5" Rear

WHEEL OFFSET = +38 Front, +38 Rear

TYRE SIZE = 195/50/15

SPACERS = None

MODIFICATIONS TO FIT = Zilch!

RIM TYPE = PIAA Monoblock FR-7

Nismodified
12-09-07, 09:36 PM
http://i73.photobucket.com/albums/i240/Nismodified/2007_0806_randomAUG0029aa-1.jpg

S13 180sx

NO guard modifications.
No spacers etc.

235/45 front

255/40 rears

Rim: KS modex rims, one piece forged monobloc 6.7kg ftmfw

deez
12-09-07, 10:10 PM
Show us some pics peeps!

cable tie
12-09-07, 10:52 PM
car= 180sx
wheels= 17"
width=8front 9rear
offsets= front=+15 rear +12 (we thinks not 100%)

tyres= front215/45 rear 225/45

mods to fit= front wide body guards and 30mm spacers to clear 4 pot brakes
rear rolled lip no spacers
http://i206.photobucket.com/albums/bb276/prawn_photos/DSC01951.jpg
http://i206.photobucket.com/albums/bb276/prawn_photos/DSC02000.jpg

Trolls Royce
13-09-07, 12:38 AM
Seeing as I sold you the wheels, I can tell you they're +14 fronts and +17 rears.

Or you could just list the offset as "awesome"

speedracr
13-09-07, 04:19 PM
CAR MODEL = EG Honda Civic Breeze

WHEEL DIAMETER = 15-inch

WHEEL WIDTH = 7-inch

WHEEL OFFSET = +13 offset

TYRE SIZE = 195/50

SPACERS = 5mm spacers on front (so front offset is +8)

MODIFICATIONS TO FIT = LOL. Front and rear camber kits and pump the hell out of the guards

RIM TYPE = SSR Mesh

----------------------------------------------------------------------------------------

CAR MODEL = Z33 Nissan 350Z

WHEEL DIAMETER = 19-inch

WHEEL WIDTH = 9-inch front, 10-inch rear

WHEEL OFFSET = +22

TYRE SIZE = 235, 265

SPACERS = None

MODIFICATIONS TO FIT = None

RIM TYPE = AME Circlar Spec R (two piece), flat front, tapered rear

----------------------------------------------------------------------------------------

CAR MODEL = Z33 Nissan 350Z

WHEEL DIAMETER = 18-inch

WHEEL WIDTH = 9-inch front, 10-inch rear

WHEEL OFFSET = +20 offset

TYRE SIZE = 235, 265

SPACERS = None

MODIFICATIONS TO FIT = None

RIM TYPE = AME Circlar Spec R (two piece), flat front, tapered rear

----------------------------------------------------------------------------------------

CAR MODEL = S15 Nissan 200SX

WHEEL DIAMETER = 17-inch front, 18-inch rear

WHEEL WIDTH = 9-inch front, 10-inch rear

WHEEL OFFSET = -5 front, -8 rear

TYRE SIZE = 235, 265

SPACERS = None

MODIFICATIONS TO FIT = Cut rear quarter panels, wide-body panels

RIM TYPE = AME Circlar Spec R (two piece), flat front, tapered rear

gimic
13-09-07, 05:04 PM
pics of the breeze speedracer!

phillb
13-09-07, 08:55 PM
Seeing as I sold you the wheels, I can tell you they're +14 fronts and +17 rears.

Or you could just list the offset as "awesome"

Your P1's are awesome :) Put up some pics Chris ;)

A'PEXi
14-09-07, 09:42 AM
charles, i want to see the breeze :D

EGG80X
14-09-07, 10:57 AM
pics of the breeze speedracer!

x2

that would be phat Charles!!

AuzM3
21-09-07, 10:05 AM
Hasn't Arrived yet, but I'm so excited to see it.

CAR MODEL = Mazda RX7 Series 8 RS

WHEEL DIAMETER = 18" Front, 18" Rear

WHEEL WIDTH = 10.5" Front, 13" Rear

WHEEL OFFSET = -8 Front, -19 Rear

TYRE SIZE = 285/30 Front, 335/30 Rear

SPACERS = None

MODIFICATIONS TO FIT = 35mm Front Fenders, 50mm Rear Fenders, Custom Rear End Suspension (push rod) :twisted:, Mini Tub Front guards. Might change during build.

RIM TYPE = SSR Professor MS1

Project1JZ
22-09-07, 01:45 PM
^ Damn you could use those wheels as a shopping basket :P -8 and -19 is nuts on an FD!

MiGoreng
09-10-07, 11:17 PM
CAR MODEL = Honda Civic EK1

WHEEL DIAMETER = F/R 16"

WHEEL WIDTH = F/R 7"

WHEEL OFFSET = Got no idea

TYRE SIZE = 205/40R16

SPACERS = None

MODIFICATIONS TO FIT = None

RIM TYPE = BSA 330

uknowsergio
12-10-07, 03:39 PM
CAR MODEL = BMW E30 M3

WHEEL DIAMETER = 16"

WHEEL WIDTH = 7.5" front, 8.5" rear

WHEEL OFFSET = +7 Front, +10 Rear

TYRE SIZE = 225/35/16 front - 255/35/16 rear

SPACERS = None

MODIFICATIONS TO FIT = Nothing

----


Hasn't Arrived yet, but I'm so excited to see it.

CAR MODEL = Mazda RX7 Series 8 RS

WHEEL DIAMETER = 18" Front, 18" Rear

WHEEL WIDTH = 10.5" Front, 13" Rear

WHEEL OFFSET = -8 Front, -19 Rear

TYRE SIZE = 285/30 Front, 335/30 Rear

SPACERS = None

MODIFICATIONS TO FIT = 35mm Front Fenders, 50mm Rear Fenders, Custom Rear End Suspension (push rod) :twisted:, Mini Tub Front guards. Might change during build.

RIM TYPE = SSR Professor MS1

Your my brother, wont fit in a lane :)

lionhart87
25-10-07, 10:28 PM
CAR MODEL = Honda Jazz Vti-S
WHEEL DIAMETER = 15" Front and Rear

WHEEL WIDTH = 6.5" Front and Rear

WHEEL OFFSET = +35

TYRE SIZE = 185/55/15 Stock Tyres.. Adrenalins next

SPACERS = None

MODIFICATIONS TO FIT = None

RIM TYPE = Work XT7

nam
31-10-07, 11:30 PM
CAR MODEL = Honda Integra Type R (DC2)

WHEEL DIAMETER = 16" front and rear

WHEEL WIDTH = 7" front and rear

WHEEL OFFSET = +35 offset front and rear

TYRE SIZE = 205/45/R16 Kumho V700

SPACERS = None

MODIFICATIONS TO FIT = Lipped Rear, will need to trim away plastics on the inside to go lower!

RIM TYPE = Desmond Evo Regamaster

[ekkY]
01-11-07, 12:24 AM
CAR MODEL = Toyota Corolla
WHEEL DIAMETER = 16" front and rear

WHEEL WIDTH = 7" front and rear

WHEEL OFFSET = +35 offset front and rear

TYRE SIZE = 205/50/R16 potenza Re711

SPACERS = None

MODIFICATIONS TO FIT = None

RIM TYPE = P1 Racing

llama_au
01-11-07, 10:01 PM
A lot of us have similar rim size, offset and tyre size. Different cars. Interesting :)

sw33tr
01-11-07, 10:18 PM
CAR MODEL = Honda DC5R

WHEEL DIAMETER = 17" front and rear

WHEEL WIDTH = 7" front and rear

WHEEL OFFSET = +32 offset front and rear

TYRE SIZE = 205/45/R17 Federal SS ;P

SPACERS = None

MODIFICATIONS TO FIT = None

RIM TYPE = P1 Racing II

Julz01
03-11-07, 12:55 PM
CAR MODEL = Toyota Sprinter (ae86)

WHEEL DIAMETER = 14"
WHEEL WIDTH = 6.5" all round
WHEEL OFFSET = +15-20 or so
TYRE SIZE = cant remember needs new ones
SPACERS = None
MODIFICATIONS TO FIT = None
RIM TYPE = Simmons V4 mesh type, dished

poeter
03-11-07, 01:29 PM
CAR MODEL = Honda Jazz VTi-S (2005)

WHEEL DIAMETER = 15" Front and Rear

WHEEL WIDTH = 7" Front and Rear

WHEEL OFFSET = +35

TYRE SIZE = 195/50/15 BS Adrenalins RE001

SPACERS = None

MODIFICATIONS TO FIT = None

RIM TYPE = BuddyClub P1 Racing QF

d-mag
03-11-07, 02:08 PM
CAR MODEL = Mazda 6 MPS

WHEEL DIAMETER = 18" front and rear

WHEEL WIDTH = 8" front and rear

WHEEL OFFSET = +45 offset front and rear (standard is 55!)

TYRE SIZE = 225/40/18 Yokohama AO48

NUTS = Rays

SPACERS = None

MODIFICATIONS TO FIT = REAR- guard lip cut back and -2 degrees camber. FRONT -3 degrees camber.

RIM TYPE = SSR Mesh

http://i178.photobucket.com/albums/w256/d-mag_MPS/041.jpg

CaptainColen
03-11-07, 02:14 PM
Let me just clear this up. A positive offset moves the stud pattern towards the car or further away? - in the rims perspective

RINGERS23Q
03-11-07, 02:17 PM
CAR MODEL = N15 Pulsar SSS

WHEEL DIAMETER = 17" front and rear

WHEEL WIDTH = 7" front and rear

WHEEL OFFSET = +42 offset front and rear

TYRE SIZE = 215/45/17 Pirelli P-Zero Corsa

NUTS = 2

SPACERS = None

MODIFICATIONS TO FIT = None

RIM TYPE = Matte Black Buddy Club P1 SF's

llama_au
04-11-07, 12:44 AM
Let me just clear this up. A positive offset moves the stud pattern towards the car or further away? - in the rims perspective

If you drew a line down the centre of a wheel, the high the positive figure the further the mounting surface sits towards the outside of a wheel. Higher positive offsets are normally found on FWD's. The further inwards the mounting surface sits the lower the offset.

meadan
04-11-07, 05:20 PM
CAR MODEL = Toyota corolla ke70

WHEEL DIAMETER = 14" front and rear

WHEEL WIDTH = 7.5" front 6.5" rear (only for the moment)

WHEEL OFFSET = -5 front and 0 rear

TYRE SIZE = 185/60 all round.

NUTS = stock

SPACERS = 5mm rear

MODIFICATIONS TO FIT = front- flared/lipped as far as i could get the wheel arches, maybe 20mm bigger to just cover the tires
rear- same, but wheels would fit with stock guards

RIM TYPE = ssr longchamp xr4 front and ssr mk1 rear

dreams
06-11-07, 10:32 PM
CAR MODEL = Honda Jazz

WHEEL DIAMETER = 16" front and rear

WHEEL WIDTH = 7" front and 8" rear

WHEEL OFFSET = +33 offset front and +35 rear

TYRE SIZE = 195/50/16 Continental SPC

NUTS = 2


MODIFICATIONS TO FIT = Roll

RIM TYPE = Volk Racing 3Piece Matte Black with polish rims

phillb
07-11-07, 10:05 AM
ok wheel gurus i got a quick question

im ordering new outers for my AMEs
after measuring and pulling my hair out this is what i came up with

20x11.5 with -5 offset

should fit on the rear of my car, JUST
bit of gentle persuasion with a knock-o-meter should sort out any issues

what you guys think????

Wow thats gonna be pretty aggressive for even Gtr guards, you may want look at how your rear camber and alignment will be affected?
Also the other thing to consider may be drivability and tramlining as you are 4 inch's over standard wheel size and nearly double in width?
Other than that -5 will mean massive amounts of dish :cool:!!!

Keven
07-11-07, 10:37 AM
CAR MODEL = 1985 Toyota Corolla Levin GT Coupe

WHEEL DIAMETER = 14"

WHEEL WIDTH = 7" front 7.5" Rear

WHEEL OFFSET = Has to be close to 0, maybe a +5ish

TYRE SIZE = 195/60/14 Yokohama A539

SPACERS = None

MODIFICATIONS TO FIT = None (Until I lower the car more :D)

RIM TYPE = Watanabe RS

2GU UP
07-11-07, 05:24 PM
Wow thats gonna be pretty aggressive for even Gtr guards, you may want look at how your rear camber and alignment will be affected?
Also the other thing to consider may be drivability and tramlining as you are 4 inch's over standard wheel size and nearly double in width?
Other than that -5 will mean massive amounts of dish :cool:!!!

yea at the moment they are 20 x 9 all round with offset +28mm
camber is rubbish as it is so its only gonna get worse

so basically its gonna have a 130mm dish which is what a wanted :D
cant wair till they arrive and i can fit em up
hopefully it will have a look that is close to that champagne FC RX-7 in the RX-7 thread
the one with 18s on the front and 20s on the rear from the US

Trolls Royce
08-11-07, 06:33 AM
LMAO i pretended to build my car?????
shows how much you know, fool.

now seriously anyone who actually has an idea on what fits on an R32 GTR body
let me know your thoughts
thanks guys

To clear up what zero seems to be getting at, those wheels are more than likely going to be a bit of a struggle to fit under standard GTR guards. I previously had 9.5 +12's under the rear of mine running a reasonable amount of camber and there wasn't a whole heap of clearance. Considering my guards have been rolled and pulled a little, I doubt you'll fit 20x11.5's without FRP or fibreglass rear guards.

Stop being so aggressive about everything.

A'PEXi
08-11-07, 02:43 PM
LMAO i pretended to build my car?????
shows how much you know, fool.

now seriously anyone who actually has an idea on what fits on an R32 GTR body
let me know your thoughts
thanks guys

what are your current wheel sizes/offset? are you running the same size front and rear (for the new wheels)? how much clearance do you have from your current wheels and what size tyres are you running?

D CUPS
08-11-07, 03:20 PM
ok wheel gurus i got a quick question

im ordering new outers for my AMEs
after measuring and pulling my hair out this is what i came up with

20x11.5 with -5 offset

should fit on the rear of my car, JUST
bit of gentle persuasion with a knock-o-meter should sort out any issues

what you guys think????

Hey man,

from going off your current 20x9inch +28 wheels,

the 20x11.5inch -5 wheels wheel stick out a further 70mm's out (that from the end of you current lip +7cm) hope that helps.

-Chester

PS: Dom (NVMYRE dude) runs 19x10inch -6 and had to go 50mm wider on the body of and RX-7 FD for an example.

2GU UP
08-11-07, 08:01 PM
what are your current wheel sizes/offset? are you running the same size front and rear (for the new wheels)? how much clearance do you have from your current wheels and what size tyres are you running?

currently running 20x9 with +28 all round with 225/35/20
the 11.5s are going on the rear only
from guard lip to rim edge i have about 73mm and i haven't touched camber settings yet
there'e 60mm between the inside of the rim and the strut so no problems there


Hey man,

from going off your current 20x9inch +28 wheels,

the 20x11.5inch -5 wheels wheel stick out a further 70mm's out (that from the end of you current lip +7cm) hope that helps.

-Chester

PS: Dom (NVMYRE dude) runs 19x10inch -6 and had to go 50mm wider on the body of and RX-7 FD for an example.

yea thats the numbers i was going off
from my on car measurements they seem to JUST barely fit
with a touch of camber it actually might tuck a little bit



what size tires you guys reckon i could stretch on em??????

doofus
08-11-07, 08:07 PM
pretty simple, its my opinion.

you pretended to built that car, so obviously you can swing a hammer.. so build a bridge and get over it..

what is this guy on about? lol

2GU UP
08-11-07, 08:36 PM
who knows bro
i reckon hes on crack

D CUPS
08-11-07, 09:12 PM
i wasnt being aggressive
i simply wanted to know why he was being a smart ass
when my question was a serious one and very far from a stupid one



currently running 20x9 with +28 all round with 225/35/20
the 11.5s are going on the rear only
from guard lip to rim edge i have about 73mm and i haven't touched camber settings yet
there'e 60mm between the inside of the rim and the strut so no problems there



yea thats the numbers i was going off
from my on car measurements they seem to JUST barely fit
with a touch of camber it actually might tuck a little bit



what size tires you guys reckon i could stretch on em??????

Just get them man ;) If they dont fit, work around them - camber, flare, pulled guards, wbk.

Peter's (bodyform) ex 32GT-R ran low offset 19x10.5inch (+10) Volks GT-S and he had to get his guards pulled at the rear (they used a similar tool to what dent busters use to get dents out...needed a respray after)

On 11.5inch rims, i wouldnt go lower than 245's. Although 325 rubber would look fantastic but obviously wont fit.

A'PEXi
09-11-07, 12:25 AM
in theory - it should fit on the rear... if you have plenty of inner clearance, then you will be able to adjust the camber to make it fit nicely... go like 265/30's

2GU UP
09-11-07, 12:40 AM
Just get them man ;) If they dont fit, work around them - camber, flare, pulled guards, wbk.

Peter's (bodyform) ex 32GT-R ran low offset 19x10.5inch (+10) Volks GT-S and he had to get his guards pulled at the rear (they used a similar tool to what dent busters use to get dents out...needed a respray after)

On 11.5inch rims, i wouldnt go lower than 245's. Although 325 rubber would look fantastic but obviously wont fit.

already been to talk to peter ;)
he said the same thing make the car fit the wheels LOL
he geed me up to do it after i saw his car

Buddah
09-11-07, 10:40 AM
Excuse my noobness, but i was under the impression that you have to run the same size wheels/tires in a gtr otherwise you mess up the 4wd system or the speedo or something along those lines? or have i been had? or does it just refer to the inches your running instead of having staggered sizes?

Trolls Royce
09-11-07, 01:38 PM
Excuse my noobness, but i was under the impression that you have to run the same size wheels/tires in a gtr otherwise you mess up the 4wd system or the speedo or something along those lines? or have i been had? or does it just refer to the inches your running instead of having staggered sizes?


It's not a GTR.

4agte
09-11-07, 01:43 PM
It's not a GTR.

its also got cream leather and chrome so the usual rules dont apply

dead32
09-11-07, 04:25 PM
Excuse my noobness, but i was under the impression that you have to run the same size wheels/tires in a gtr otherwise you mess up the 4wd system or the speedo or something along those lines? or have i been had? or does it just refer to the inches your running instead of having staggered sizes?

that only applies if the car moove's, i doubt mooving off a tow truck to its bay at the autosaloon would cause any drama's with the attessa. however extended period's of driving would cause damage.

2GU UP
09-11-07, 04:53 PM
you guys are so funny
yea as anabolic said the car isn't a GTR
but on GTRs yes you have to have the same rolling diameter all round

dead32 - only reason my cars doesn't move right now is because I'm waiting on a new ECU and injector plugs.
my car got driven at least 3 times a week since its build in 2004
it ain't no show pony trailer queen

dead32
09-11-07, 06:04 PM
i remember seein ur car on couple years ago on james ruse drive, other then that was show n shine at a drift day... i like the colour personaly and the engine bay, just shits me to tears when i dont see half of cars ur style drive... is that an isleep plenum?

Buddah
09-11-07, 06:23 PM
Oh my bad, i just figured it was a gtr with all the gtr related stuff u have on it.
Cool so I'm not so crazy after all.

Modified
09-11-07, 07:34 PM
but on GTRs yes you have to have the same rolling diameter all round

on all cars you should try and keep the rolling diameter the same... otherwise your speedo gets put out, and that is not a thing the popo like.

2GU UP
09-11-07, 07:41 PM
dead32 - nah its one that my fabricator made up

modified - depends on how the speedo is driven

m0nty
16-11-07, 08:28 AM
CAR MODEL = 2003 Honda Integra DC5 Type R

WHEEL DIAMETER = 17" Front - 17" Rear

WHEEL WIDTH = 7.5" Front, 7.5" Rear

WHEEL OFFSET = +45 Front, +45 Rear

TYRE SIZE = 215/45 Front, 215/45 Rear - Bridgestone RE55s

SPACERS = Isotta 16mm all round

MODIFICATIONS TO FIT = No guard rolling. Tein Flex coilovers lowered a further 1" from standard setting (4" lower than OEM) Rays lightweight lugnuts. -3` camber front with 1` toe out (Track setting only. Car rarely street driven)
RIM TYPE = Volk TE37 White


Sorry for average photo. All I've got at the moment.
http://i219.photobucket.com/albums/cc52/ITRm0nty/RE55Front.jpg

Wheels for driving on street are Work XD9 Emotions 17x7.5+30 with 215/45-17 Michelin Pilot Sports. Getting new TE37s for the rear in january. Will be running 17x9 +30 for more rear end stability. Car is fairly skatey under acceleration on bumpy corners.

Dominik
22-11-07, 12:45 PM
CAR MODEL = Nissan Cedric GT Y32 (1994)

WHEEL DIAMETER = 18" Front & Rear

WHEEL WIDTH = 9" Front, 10" Rear

WHEEL OFFSET = +13 Front, +5 Rear

TYRE SIZE = 225/40 Front, 235/40 Rear

SPACERS = Soon to have a 10mm in the front, to match flushness of the rear

MODIFICATIONS TO FIT = JIC coilovers with adjustable camber on the front (set to max: 4.3 degrees), rear adjustable toe control and camber arms, with locking nut removed to add extra camber: 6.0 degrees.

Rolled guards front and rear, wheel well protrusions hammered out in the rear, front fenders pulled about 3-5mm (not noticeable)

Ride height set to make sure rims are flush (1" from fender on rear, 1.5" on front)

RIM TYPE = Work Euroline DH with black face

http://img.photobucket.com/albums/v257/dbloemhard/Cedric/Camber/CIMG0547.jpg

Buddy
22-11-07, 01:14 PM
car looking interesting!!

Dominik
22-11-07, 02:11 PM
Thanks... posted a bunch more pics here http://forum.jdmstyletuning.com/showthread.php?t=6231

I think the wheel info is not likely to help anyone else, since its a rare car. But the principals work for all cars: Stretch tyres, flatten fenders, camber like hell. Personally i dont like the duckbill pulled fenders look, but that can work too...

oni
05-12-07, 03:16 AM
CAR MODEL = ke70 Corolla

WHEEL DIAMETER = 14'

WHEEL WIDTH = 7' Front, 7.5' Rear

WHEEL OFFSET = +5 Front, 0 Rear

TYRE SIZE = 205/60 Front, 215/60 Rear

SPACERS = None

MODIFICATIONS TO FIT = bit of time with a baseball bat and an engineers hammer

RIM TYPE = Southern Ways Mesh