The official POST YOUR LATEST MODS thread

[anth]

my grandmother has that table cloth lol

[Daniel - SoAsianDVD]

http://www.notonmonday.com/images/photoshoots/20070817/CRW_6955_800web.jpg

After a 3 month settlement it's finally mine! :D

The most expensive of all!! Good on you.

[Babalouie]

So when you gonna start modifying it, Wilch :)

[Waggy]

Yeah Wilch, raise it like it's hot.

[wilch]

lol, thanks guys

I've already started with the modifying. Ripped up the lounge/diner carpet on Sat. lol

before:
http://www.notonmonday.com/images/photoshoots/20070817/CRW_6962_800web.jpg

after:
http://www.notonmonday.com/images/photoshoots/20070817/CRW_6978_800web.jpg

[Cappuccino]

where did you end up purchasing?

[prusso]

looks awesome mate!
i just ripped up my carpet and laid down some floorboards, makes the room alot cleaner and bigger imho.

[wilch]

Cherrybrook :)

[Davf]

JDM styled stripped interior ftw! lol

[Gav]

JDM styled stripped interior ftw! lol


LMAO!!

[Waggy]

For some reason wilch... and call this cliche....but as soon as I saw the piccy after the carpet has been ripped up something sprung into my head.

I think that room would look really nice with a slight Japanese theme to it.... it looks very "grandeur".

Here's what I would do:
Paint the seperating board (the one that's in the middle of the wall - horizontally) a really dark brown.
Bottom walls (below the board) off-white
Top walls a light brown/beige
Paint ceiling and architrave white
Deep red curtains

Some nice deep red rugs and a really low wooden mahogany coffee table and really big plush red cushions to the side of it.

No I'm not a part of the fab 5.....
No I'm not ghey.....

[Gav]

For some reason wilch... and call this cliche....but as soon as I saw the piccy after the carpet has been ripped up something sprung into my head.

I think that room would look really nice with a slight Japanese theme to it.... it looks very "grandeur".

Here's what I would do:
Paint the seperating board (the one that's in the middle of the wall - horizontally) a really dark brown.
Bottom walls (below the board) off-white
Top walls a light brown/beige
Paint ceiling and architrave white
Deep red curtains

Some nice deep red rugs and a really low wooden mahogany coffee table and really big plush red cushions to the side of it.

No I'm not a part of the fab 5.....
No I'm not ghey.....



I'd just put in a sega rally machine or something. Job done. Who cares what the room looks like if you're racing. xD

[Mike.V?!]

Hi five, Wilch! House mods are almost as fun as car mods.

[wilch]

For some reason wilch... and call this cliche....but as soon as I saw the piccy after the carpet has been ripped up something sprung into my head.

I think that room would look really nice with a slight Japanese theme to it.... it looks very "grandeur".

Here's what I would do:
Paint the seperating board (the one that's in the middle of the wall - horizontally) a really dark brown.
Bottom walls (below the board) off-white
Top walls a light brown/beige
Paint ceiling and architrave white
Deep red curtains

Some nice deep red rugs and a really low wooden mahogany coffee table and really big plush red cushions to the side of it.

No I'm not a part of the fab 5.....
No I'm not ghey.....

That's actually not a bad idea!

[wilch]

Hi five, Wilch! House mods are almost as fun as car mods.

Thanks man. Easier too I think. lol

[Waggy]

Do it......DO IT!! :D

[doofus]

JDM styled stripped interior ftw! lol

HAHAHAHA!!

congrates on the purchase dude!

[wngo]

clean house!

[Sp33dY]

Enough of 'Changing Rooms' .... back to cars.



My flywheel Brokekneknedd.... Flywheel cracked, clutch disk rooted/mashed/worn, clutch plate distorted --- it's been at mitsu for the past week. BEtter be covered by warranty or heads will roll -- flywheels on stock cars dont end up like that through abuse!


Flywheel ... "Slightly' visible crack!
http://www.sp33dy.com/stuff/mashed_crack_1.jpg

Closeup of 'the crack'
http://www.sp33dy.com/stuff/mashed_crack_2.jpg

Yep, it went the whole way through the casting from the outer diam, to inner diam, from top to bottom.
http://www.sp33dy.com/stuff/mashed_crack_3.jpg

I was surprised to find an Exedy clutch inside for an OEM part! This made me happy ...
http://www.sp33dy.com/stuff/mashed_crack_4.jpg

But when i saw how mashed it was .... it made me sad.
Im no expert, but i didnt think clutch discs were meant to 'wear' like that???
Almost looks as though the crack has grated one side of the clutch disc.
http://www.sp33dy.com/stuff/mashed_crack_5.jpg

The other side also looked to be cactus due to everything going out of alignment.
http://www.sp33dy.com/stuff/mashed_crack_6.jpg

The pressure plate also copped some custom machining to the face by damaging it.
http://www.sp33dy.com/stuff/mashed_crack_7.jpg

Also looks like the flywheel attempted to rub against the housing.
IM glad i stopped driving, as my passenger might of ended up being butchered by a flywheel at 3000rpm.

http://www.sp33dy.com/stuff/mashed_crack_8.jpg

[Gorilla]

geeezus Speedy thats fucking crazy, how did you do that?? Did you Echo go through any clutches????

[Sp33dY]

Yes shane ... it's fuckin crazy. Echo went through 1 clutch, and 1 set of brake pads, that was it --- wheni ripped the clutch out in the echo (DIY FTW!) the flywheel was all good, and just needed ot be machined down a tad --- no fractures/or minute cracks of any kind were visible ..... Overall the echo had TONNNES of abuse but was mostly bulletproof. Was fairly unbreakable like the Hilux. lol

Although my lancer has done 32,000kms in the last 11 and a bit months, ive never abused it anything like i did with the echo. The fact that a crack that huge has occured prior to the clutch being absolutely flat --- i reckon its a manuf fault thats gotten worse and owrse over time. Happened when i was driving enthusiastically on a local twisty ...... not much more to say than that.

Eitherway , if it was due to an abusive driver, i'd of had little fractures all over the flywheel --- not just 1 big mother in it. Am still not sure if anything else was damaged in the process. ... am waiting fro Mitsu to call me over the next couple of days. Last friday they were still waiting on some parts to arrive to reassemble the clutch/flywheel assy.

Lesson so far? Shoulda stuck to a toyota instead of buying a Mitsu!

[Mike.V?!]

That's not so much a crack as it is a ravine. Scary shit.

[josh2.5]

Enough of 'Changing Rooms' .... back to cars.

Suzie Wilkes FTW!!!!

[Gorilla]

damn, Toyota reliability hahaha!!

Back to thread, i have done some major mods too...no pics tho :(

Finally got me a set of Advan RG :D

[Sp33dY]

Shane ... picsorban !!! (Advan RG's).


I picked up my car at lunchtime!!! Feels so wierd to drive!
Im not sure if it's because :

A) I got used to a Hyundai Excel (girlfriends car) OR

B) gearbox and brakes (and maybe motor) have fresh fluid & pedals have all been adjusted. Gearbox feels like it has a short shift kit in it compared to driving the Excel, and feels somewhat 'tighter' when changing gears than it did before. Brakes feel super sensitive, and clutch feels softer to press compared to what it used to be like. Will be odd driving it home from work for the first time in nearlly 2 weeks! Im convinced now that the flywheel was probably on the way out but didnt realise it till it happened.

[RINGERS23Q]

My newest:

http://www.nloc.net/photopost/data/680/25409-200-17713.jpg

No, it's not the fuel line...

[Gorilla]

Shane ... picsorban !!! (Advan RG's).

I got word today that one is buckled :(

[Sp33dY]

I bet u were waving the angry fist at Yahoo Auctions JP! :(

[Gorilla]

hahah yeah, but it wasnt from yahoo, from another shop in japan my supplier uses. Hopefully he finds another set, there is a set but its white...no good ay?

[Evan]

The 2.4 lancers got an ungraded clutch for the extra powah!
Crazy flywheel damage!

[Sp33dY]

LOL .. Ungraded sounds about right Evan .... should of been upgraded :P

[llama_au]

You're welcome to piss yourself laughing at this 'mod', but it works.

I found a very convenient use for the rear strut brace today. I was sick of my cleaning products flying around the boot every time I took a corner (hence why the carpet looks so ratty as everything under the sun has been spilt on it.) I bought a storage box from Bunnings and cable-tied it to the strut brace as there's nowhere else in the boot to attach anything without drilling. So far so good. If anyone wants pics I'll get some.

[CORZA]

I got new nuts :D Pics taken from phone

http://i106.photobucket.com/albums/m280/TUF555/DSC00126.jpg

http://i106.photobucket.com/albums/m280/TUF555/DSC00123.jpg

[llama_au]

There are so many nut jokes I could make right now.

[Kikkoman]

There are so many nut jokes I could make right now.

You like making nut and ball jokes huh??


As seen in JF's s2k thread.

I could make so many blue knob jokes right now haha

lol!

[llama_au]

You are very observant. What can I say, genitals are funny.

[J]

dw, kikkomans a feminist anyways

[prusso]

got my buddyclub n+ coilovers installed today by powerplay imports on my honda integra dc5
will post pics and a review soon
so far they have definately outweighed my expectations of the product

[wilch]

Powerplay rocks!

[kula]

man my car is dirty!
but ive finally thought of a number plate...

http://www.markpakula.com/5/mods/RDA57R.jpg

[Bodgy Racing Developments]

i dont get it

[rodent]

Hahah very Japanese. Love it!

[Bodgy Racing Developments]

hahhahahahahah just got it.

nice!

[EGG80X]

http://i81.photobucket.com/albums/j201/jdmegg/My%20Mx5/IMG_2011.jpg
http://i81.photobucket.com/albums/j201/jdmegg/Nitro%20RC/IMG_2004.jpg
http://i81.photobucket.com/albums/j201/jdmegg/Nitro%20RC/IMG_2007.jpg

[Sp33dY]

Kelv ... nice pink bits yo!


As for the Lancer .... i put some eclipse 3-way co-ax's in the front doors, and put the stock knob back on after getting bored with the Razo. Also removed a couple a stickers that had been put on it at a recent jdmst meet.

[deez]

Awesome plates kula :)

[Daniel - SoAsianDVD]

Road&Ster!!

[kula]

not exactly.. its just the way the nihons say roadster..
its like, rod-a-star.

[Bodgy Racing Developments]

Kelv ... nice pink bits yo!


As for the Lancer .... i put some eclipse 3-way co-ax's in the front doors, and put the stock knob back on after getting bored with the Razo. Also removed a couple a stickers that had been put on it at a recent jdmst meet.

hey sp33dy, hows the eclipse speakers? im looking at upgrading my stock speakers and am planning to go with eclipse. I have an eclipse deck and thats awesome so i hope the speakers are the same quality.

[sikx5]

New Seat for the gt4 :D
http://img509.imageshack.us/img509/7889/dsc8475gw9.jpg
http://img509.imageshack.us/img509/573/dsc8476ve7.jpg
http://img178.imageshack.us/img178/3076/dsc8477ep8.jpg
http://img242.imageshack.us/img242/9343/dsc8478om4.jpg

and the original bride seat rail finally rocked up today!!! just fitted it up :D
box full of jdm paper :lol:
http://img120.imageshack.us/img120/4940/dsc8562ca0.jpg
http://img441.imageshack.us/img441/5026/dsc8563si3.jpg
Finally fitted!!
http://img441.imageshack.us/img441/8339/dsc8566hq8.jpg
http://img254.imageshack.us/img254/2653/dsc8567ax3.jpg
http://img444.imageshack.us/img444/2678/dsc8568du6.jpg

Took it for a spin around the block, the holding monster is just awesome!
Now to sort something out for the passenger side, something with more room is a must, looking at the cuga range of the low max.

[Evan]

porn

[doofus]

OMG! HOT!

[kula]

sex

[|N|]

http://i2.photobucket.com/albums/y7/nt_889/DSC08932.jpg

[anth]

http://img300.imageshack.us/img300/9817/photo0234nf2.jpg

(should look a bit better tomorrow lol)

[A'PEXi]

rofl nice masking skills :D

[doofus]

nice work anth!

[Gav]

Am I the only one who doesn't understand why you have some sort of pot taped to your car? :S

[eve.R]

apply more pressure?

[Dave R]

sick wide body s15!

[arron]

Got a new piano + piano seat..

http://img517.imageshack.us/img517/2482/photo0160xo3.jpg

[supernatural]

take off those junks u have on the seat... :P

defi's cool :)

[lovesil]

Am I the only one who doesn't understand why you have some sort of pot taped to your car? :S

Its used when putting on a bodykit. Basically as Eve.R said, its applying constant pressure on the new sticked bodykit, so it will stick on properly. Remember: No such glue can stick on and harden almost immediately.

[phat_nam]

Got a new piano + piano seat..

http://img517.imageshack.us/img517/2482/photo0160xo3.jpg

lol arron i can see your slowly starting to mod your car? keke whats coming up next?

[EGG80X]

http://i81.photobucket.com/albums/j201/jdmegg/My%20Mx5/IMG_2127.jpg

fully sick uleh habib....best 5 bucks mod lol

[wilch]

http://www.wbcarphotos.com/portfolio/r33gtstcarbon/CRW_7064_800web.jpg

more pics here: http://forum.jdmstyletuning.com/showthread.php?t=4740

[Sp33dY]

fully sick uleh habib....best 5 bucks mod lol

Man. that loooks pretty good!!! :D

[Dave R]

Got a new piano + piano seat..

http://img517.imageshack.us/img517/2482/photo0160xo3.jpg

did u end up going for the guage holder 2 ?

they look awesome when fitted (im so excited for mine ! just waiting for sensors and sandwich plate !) will post pics ! hopefully b4 supersprints!!!!

[anth]

Am I the only one who doesn't understand why you have some sort of pot taped to your car? :S


Its used when putting on a bodykit. Basically as Eve.R said, its applying constant pressure on the new sticked bodykit, so it will stick on properly. Remember: No such glue can stick on and harden almost immediately.

yep thats right. got the nismo rear pods put on. when i picked my car up from the panel beater the glue was still setting and they had the pot taped on to hold pressure onto it. when i got home i added the glass tape because the masking tape copped a bit of a beating from the wind on the freeway. anyways it looks better now :D just gotta get some pics

[llama_au]

Pods looks really tidy, nice and simple. Pods ftw :D

[denka]

http://i81.photobucket.com/albums/j201/jdmegg/My%20Mx5/IMG_2127.jpg

fully sick uleh habib....best 5 bucks mod lol

You talking about the red lip that you've added to your wheels? What did you use and where can i get some?!? :)

[uknowsergio]

You talking about the red lip that you've added to your wheels? What did you use and where can i get some?!? :)

i 2nd that.

where can i get some?

[EGG80X]

a steady hand plus some red paint and piant brush

[arron]

lol arron i can see your slowly starting to mod your car? keke whats coming up next?

hey nam, I'm going slow on mods.. This is my only "mod" as such.. not really even a mod as there are no performance benefits... just getting them so I can really justify whether or not I should get an oil cooler..

And if anyone else thinks it's a lot of money just to monitor that car's status, then dont worry as these DEFI's will be moved from car to car.. Even if I end up buying a camry like every other Korean dad..


did u end up going for the guage holder 2 ?

they look awesome when fitted (im so excited for mine ! just waiting for sensors and sandwich plate !) will post pics ! hopefully b4 supersprints!!!!

I'm waiting on JDMyard to have stock.. haha.. I had a look around ebay and other shops but no one has any.. so just waiting.. until then, I'm going to install all sensors and hook up the control unit.. When I get the gauge-holder, I'll install the gauges..

[arron]

http://i81.photobucket.com/albums/j201/jdmegg/My%20Mx5/IMG_2127.jpg

fully sick uleh habib....best 5 bucks mod lol

Omg, this sooo funny.. after the EOMM on friday, I was actually planning to go and paint the lip of my OEM rims red too.. hahaha.. and I thought I was gonna be the first person to do it.. haha.. i guess someone else is as smart as I am.. hahaha

[EGG80X]

Omg, this sooo funny.. after the EOMM on friday, I was actually planning to go and paint the lip of my OEM rims red too.. hahaha.. and I thought I was gonna be the first person to do it.. haha.. i guess someone else is as smart as I am.. hahaha

lol I did it last week (want to unveil at the eomm), but had the idea a few months ago.... finally got off my ass and did it lol

[nath]

Just gotta paint the centres satin black now Kelv.

[wngo]

http://i81.photobucket.com/albums/j201/jdmegg/My%20Mx5/IMG_2127.jpg

fully sick uleh habib....best 5 bucks mod lol

are those the rsgt wheels from ozzy tyres?

[Dave R]

hey nam, I'm going slow on mods.. This is my only "mod" as such.. not really even a mod as there are no performance benefits... just getting them so I can really justify whether or not I should get an oil cooler..

And if anyone else thinks it's a lot of money just to monitor that car's status, then dont worry as these DEFI's will be moved from car to car.. Even if I end up buying a camry like every other Korean dad..



I'm waiting on JDMyard to have stock.. haha.. I had a look around ebay and other shops but no one has any.. so just waiting.. until then, I'm going to install all sensors and hook up the control unit.. When I get the gauge-holder, I'll install the gauges..

where did u get ur sensors and sandwich plate from ?

[arron]

All relevant sensors came with the DEFI gauges. They come included inside the boxes. If you don't have any sensors, shoot Troy from PRO-Speed Racing with an email.. You can also PM him through the TRADERS section of OzHonda. If not, www.prospeedracing.com.au (http://www.prospeedracing.com.au/)

He's an official Australian distributor of Defi.. He also supplied the sandwich plate + water sensor holder (T piece thing) with my gauge purchase...

[Gorilla]

Awesome Job Kelvin!

[Gav]

Its used when putting on a bodykit. Basically as Eve.R said, its applying constant pressure on the new sticked bodykit, so it will stick on properly. Remember: No such glue can stick on and harden almost immediately.




Ahh right,thanks! :D

[l-plates]

i did the red lip on my rims to...
i sprayed the rims lip red first..
then taped up the red...then sprayed my rims black..
just did a whole change of colour from gold......
turned out nice aswell.!!

[arron]

i did the red lip on my rims to...
i sprayed the rims lip red first..
then taped up the red...then sprayed my rims black..
just did a whole change of colour from gold......
turned out nice aswell.!!

Never happened without PICS! hahaha.. I would like to see these...

[gimic]

http://img111.imageshack.us/img111/5761/03092007ht3.jpg

15" PIAA FR-7 Monoblock wheels
something different to the usual.

one question though, is monoblock a forging proces?? or still a light cast process?

[DuGong]

mono block means 1 piece wheel?

[Hens]

my new track wheels with new direzza dz02g rubber :D
http://img380.imageshack.us/img380/958/workemotioncrkaireplicawu3.jpg

i so want to put it on as daily but dont want to waste the tyres on the street. :(

[Gorilla]

My mate just bought a series 8 rxy, with Direzza wheels looks identical to those iced.

Here are a couple of my new mods.
http://www.mr2supercharger.com/TodaRacing_files/pict36.jpg
http://img.photobucket.com/albums/v472/koffee-black/Buddyclubseat.jpg
http://img.photobucket.com/albums/v472/koffee-black/Engineturbo1.jpg

[kawasaki]

wooo turbo :) should be fun

[anth]

questlove did you buy another motor and have it built? or is that your current motor just removed from the car?

[Gorilla]

na thats the current motor, decided to take it out and freshen it up with new seals, gaskets and belts

[anth]

very good idea man. thats gonna be a scary ride when its done!

[sikx5]

nice turbo/enigne setup Questlove! Thats an awesome looking heatshield for the manifold, did you make that yourself?

[Gorilla]

Yeah thanks dude, It was done with the acl stuff. Im hoping that the intercooler piping which foes over the manifild will clear it hehe..

[l-plates]

http://images.carsales.com.au/private/2547376.jpg

pic is dark...

[z10]

my latest and 1st attempt on the AE86 coupe

Original Zenki front lip

http://temp.australianinfront.com.au/auto/ae86/86/DSC00764.jpg

anyone know how to fix this? ( zenki lip on kouki bar)]

http://temp.australianinfront.com.au/auto/ae86/86/DSC00765.jpg

brand new toyota door striker to replace the rusty old unit

http://temp.australianinfront.com.au/auto/ae86/86/DSC00766.jpg

brand new toyota door hinges to replace the old saggy/loose units

http://temp.australianinfront.com.au/auto/ae86/86/DSC00767.jpg

brand new Nardi steering wheel with matching red stitch recaro ( in need of new KARO floor mats badly!)

http://temp.australianinfront.com.au/auto/ae86/86/DSC00768.jpg

original optional side skirt ( fits like a glove!)

http://temp.australianinfront.com.au/auto/ae86/86/DSC00769.jpg

carbing 3 point solid front tower bar, TIGHT!

http://temp.australianinfront.com.au/auto/ae86/86/DSC00770.jpg

BuddyCLub Racing spec condenser. ( better audio quality and smoother idle,pardon the "made in Indonesia" battery :P)

http://temp.australianinfront.com.au/auto/ae86/86/DSC00771.jpg

brand new toyota hood latch. (i just want a new item although the original still perfectly fine)

http://temp.australianinfront.com.au/auto/ae86/86/DSC00772.jpg

[Gorilla]

Nice stuff z10, actually the mr2 guys are looking for prices for group buys on the carbing strut braces, maybe you guys can help??

[Kikkoman]

New clear indicators
http://img502.imageshack.us/img502/9121/image033rj3.jpg

They usually look like this..

http://www.padandwheels.com/mr2/cleartails/ClearTails0001.jpg

[Gorilla]

whoa, where di dyou get them? i always wanted them, and was always going to mkae my own.

[Justin Fox]

http://temp.australianinfront.com.au/auto/mys2k/re30.jpg

http://temp.australianinfront.com.au/auto/mys2k/re301.jpg

http://temp.australianinfront.com.au/auto/mys2k/re302.jpg

New RE30's are on (front 17x7.5 +43 and the rear 17x90 +54) with Bridgstone Adrenalins (F 215/45R17 R 245/40R17) and Rays short type lock nuts. :)

Need to clean the car before more pics!

[.::F[L]Y::.]

^^^ WOW looks great Justin.

[LaT1NaSo]

excellent choice.....those or CE28 would have been perfect.....looks very nice

[Sp33dY]

diD U CONSIDER THEM in gunmetal ? Bronze was a brave choice for a silver car in my ipinion!

[Hens]

bronze > gunmetal :)

[llama_au]

I added a little rice:

http://i57.photobucket.com/albums/g219/jdmconcept-com-au/nismo/radiatorcap.jpg

[Justin Fox]

I considered everything before buying them LOL.

[RaYmO]

Impulse bought the following - Zoom Engineering meter panel...

Just need red defi gauges now!

http://img206.imageshack.us/img206/7936/p1010224qp2.jpg

Here's how they look fitted:

http://www.zoom-eng.com/catalog/images/in120.JPG

[Mang]

Seat, engine damper and rear camber kit for my accord euro

http://farm2.static.flickr.com/1269/889757903_574c3cd9a1.jpg

http://farm2.static.flickr.com/1319/890599760_d746a68737.jpg

[doofus]

kikkoman - they look really nice!!

justin, damn nice wheels man!

[Deviliss]

Seat, engine damper and rear camber kit for my accord euro

http://farm2.static.flickr.com/1269/889757903_574c3cd9a1.jpg



DAMN THOSE SEATS ARE HOT!!

[lovesil]

Seat, engine damper and rear camber kit for my accord euro

http://farm2.static.flickr.com/1269/889757903_574c3cd9a1.jpg



How come the seat looks like a panda with a black back :D

[Sp33dY]

bleh

[Dave R]

thats sad man... :P hehehehe

[J]

Zi, i didnt think that car could improve any more, you have done an awesome job.
cant get over it haha

[z10]

Zi, i didnt think that car could improve any more, you have done an awesome job.
cant get over it haha
haha thanks

car is no where near what i have in mind yet.

[Justin Fox]

http://farm2.static.flickr.com/1269/889757903_574c3cd9a1.jpg
Wow. Check out those heels... But seriously... HOT SEAT!

[Mang]

Thx
not many ppl like the Cuga, most ppl prefer GIAS

[sikx5]

Awesome Seat there Mang!! Ive been looking to get a Cuga CF seat, Where did you get that from?? it looks awesome. Its supposed to have alot more room compared to the GIAS? is that true? My gias doesnt leave much ball room, suited to very skinny drivers i guess :D

[Mang]

I got it from a shop in Hong Kong GP motor.I haven't have a chance to try the GIAS yet, but i would think the cuga have a lot more room than the GIAS

[arron]

http://img164.imageshack.us/img164/6888/dsc00977resizedwv8.jpg

Yup! Got a new air refresher..

But by god, it took me 10 hours to fit all the gauges and sensors properly.. But well worth it

[Mike.V?!]

Flexane goop filled engine mounts. Hopefully these ones last longer than my old ones :/

http://mikevictory.com/anywhere/sss/DSCF4962.JPG

[llama_au]

Only semi-solid? Weak :P

[Mike.V?!]

Hey, don't you have an auto box to go blow up or something? :P

[Rad]

Nothing special, just new tyres.

http://users.on.net/~Radek/rt615.jpg

[llama_au]

Hey, don't you have an auto box to go blow up or something? :P

Not today :P 'sif this one is going to blow, it's ~3,200km in so far and it's under warranty for 40,000 ;)

I still stick by my original statement - weak. Serious, you should have knocked out all of the OEM garbage and solid-filled the whole thing, or bought solid inserts. Semi-solids aren't that good.

[m0nty]

Does oil and filter count as a mod? :p

Engine is soaking in Motul 3000V in readiness for track day Monday.

[jolt]

Recently had some work done by Pulse Racing down in Menai:
- Reflash OEM ECU and custom tune
- VF34 @ 1.2 Bar
- Blitz SBC i-Color
- Walbro fuel pump
- Cusco turbo heatshield and silicon TMIC to throttle body connector
- CES boost enhancer plate for VF34
- CES catless up-pipe
- Silicon airbox to turbo intake pipe
- Endless SS-M pads front and rear
- Bleed and top up Trust brake fluid
- Hooked up the electrics for my GFB Deceptor Pro BOV - sleeper to Leb-spec at the turn of a knob in the cabin

183rwkW and a HEAP of torque that comes on nice and early, incredible to drive on the street and a REAL sleeper.

I'll complete the sleeper look first:
- Ditch the MY03 STi style CF scoop
- Replace with OEM MY02 STi colour matched scoop to complete the sleeper look

Transmission mod's:
- Larger transmission fluid cooler
- Auto valve body modifications for firmer and faster shifts

It really needs more rubber and some suspension mod's but I want to keep the stock ride height. Might also go for some four pot WRX brakes up front and I need to fit the Cusco master cylinder stopper that's been sitting on the shelf for months as well as the Blitz R-VIT with a whole bunch of sensors to keep an eye on things.

The Blitz SBC i-Color needs a little fine tuning too.

thanks
Rod

[Hens]

183rwkW?
is your wrx rwd?

[nath]

Umm, think it's a Forester, Henry.

[Dave R]

well then is his forester rwd ? :P

well if a wash can be counted as a mod :P.. haven't posted any pics of my mods on the actual car so ill do that now :P hahah... (i got bored so took some pics - but was 2 lazy 2 leave garage)

http://i142.photobucket.com/albums/r95/DCR_88/HIDS.jpg
Mu Secret HID'S

http://i142.photobucket.com/albums/r95/DCR_88/5ZIGEN_JASMA.jpg
5Zigen Extractors

http://i142.photobucket.com/albums/r95/DCR_88/IMG_1556.jpg
J's Racing C-Piller Brace

http://i142.photobucket.com/albums/r95/DCR_88/IMG_1543.jpg
Fire Extinguisher (needed for NSW CAMS SUPERSPRINTS)

[ I know im not the best photographer :( so be gentle :P - lol im on my laptop and don't have photo shop so only had the use of picasa2 :P]

[Dave R]

http://i142.photobucket.com/albums/r95/DCR_88/Image002.jpg
DEFI's waiting 2 go in! (shit phone pic)

But retarded courier company fucked up and lost my sensors and sandwich plate :cry:

[Oscar]

dont have any pics yet but will soon.. most recent Mods/upgrades are..

-10,000k hi/lo Mu Secret HID's
-Gear Box Upgrade
-Exedy Heavy Duty Racing Clutch
-Bosh Gold Battery...lol



lol!:twisted: follow the rules?


OK, only one rule: You must post a picture (no use just telling us in words what's new!!!).

[Evan]

Nothing special, just new tyres.

http://users.on.net/~Radek/rt615.jpg

My uncle uses the same tyres on his sss too

[nath]

well then is his forester rwd ? :P

well if a wash can be counted as a mod :P.. haven't posted any pics of my mods on the actual car so ill do that now :P hahah... (i got bored so took some pics - but was 2 lazy 2 leave garage)

http://i142.photobucket.com/albums/r95/DCR_88/HIDS.jpg
Mu Secret HID'S

http://i142.photobucket.com/albums/r95/DCR_88/5ZIGEN_JASMA.jpg
5Zigen Extractors

http://i142.photobucket.com/albums/r95/DCR_88/IMG_1556.jpg
J's Racing C-Piller Brace

http://i142.photobucket.com/albums/r95/DCR_88/IMG_1543.jpg
Fire Extinguisher (needed for NSW CAMS SUPERSPRINTS)

[ I know im not the best photographer :( so be gentle :P - lol im on my laptop and don't have photo shop so only had the use of picasa2 :P]

Nice work Dave. DC2R is coming along nicely. How's your dad's MX going?

[Dave R]

its going well... he melted a piston a while ago, so its in mx5mania in the safe and skill full hands of Dave...

hes getting forged pistons and more boost :) also getting some tein coilovers...

he said he wants 2 come 2 one of the OEMM so that means it will be +1 for ITR's and +1 for the MX5's :P


sorry for not posting pics of his mods guys :( will be doing a photoshoot of them 2gether eventually...

thanks for the kind words man :)

although with the dc2r.. after my last few mods are fitted that will be it, and ill be after a EVO 8 or something faster and FI, RWD/AWD...

[arron]

hey shifty,

info on your 3 gauge holder plz! Where from and how much?

[Dave R]

From JDMyard :)

[jolt]

Oops!! Good point ... 183 front wheel kW which is basically the same as 183 kW at all four wheels. And yes, it is an MY05 Forester XT.

thanks
Rod

[jolt]

so its in mx5mania in the safe and skill full hands of Dave

hmmm ...

[vtec-NA.th]

5Zigen A Spec - nice tone and not tooo loud:
http://img516.imageshack.us/img516/4144/dsc00008vf3.jpg

Spoon Front Strut:
http://img517.imageshack.us/img517/8246/dsc00009in6.jpg

[sikx5]

SHIFTY : Awesome first pic, looks like the monster in the cage, very nice!

[Dave R]

hmmm ...
What does that mean ? Lol


SHIFTY : Awesome first pic, looks like the monster in the cage, very nice!
Thanks man :P greatest thing about photography is that u can only get better :D

[Kaotic]

Most Recent mods/Upgrades...

-10,000k Mu Secret hi/lo HID's
-Bosh Gold Battery...lol
-Exedy Racing Clutch Kit
-New Gear Box Bearings
-Number plates


No pics of clutch or bearings...lol

http://img254.imageshack.us/img254/8771/dsc01494ej9.jpg (http://imageshack.us)
http://img72.imageshack.us/img72/5875/dsc01499lh9.jpg (http://imageshack.us)
http://img293.imageshack.us/img293/9240/dsc01500eq2.jpg (http://imageshack.us)
http://img293.imageshack.us/img293/5690/dsc01501zw4.jpg (http://imageshack.us)
http://img520.imageshack.us/img520/1108/dsc01502bl3.jpg (http://imageshack.us)

[Hens]

bling red wipers y0 ;)

[Kaotic]

lol... yeah i gota paint them black again..lol they look so shit!!

[uknowsergio]

Is your badge glowing? or is that my screen f*cking with me.

[Kaotic]

its glowing... Yeah i know its kinda gay and its rice...and iv been bagged out about it many times so yeah...

[Oscar]

no offense but just being curious

so did you get ripped
or now the technology has been up to 10000k HID
and they are also road worthy??

referring to member van mentioned in this thread ages ago
IMHO,this should be sticky...

here is the thread:
http://forum.jdmstyletuning.com/showthread.php?p=12782#post12782

[vtec-NA.th]

wow those lights are a little blue :P

[Kaotic]

they probably turned out bluer in the pic than they realy are...Iv found there are other HID's that seem bluer than mine... Like for example Arrons(BLK10N) HIDs seem realy blue...if not bluer than mine! Dont think the Temperature rating(K-Kelvin) has any affect on brightness but more the colour spectrum thats why u get from yellow to white to blue to purple... Thats from what i know of anyhoo..

[PyRoMaNiAc]

Couple of new additions
http://users.bigpond.net.au/pyromaniac/nomoreboost1.jpg
http://users.bigpond.net.au/pyromaniac/nomoreboost2.jpg

[Kikkoman]

Oh dude!
sandwiched?

[llama_au]

Fark. What happened mate?

[m0nty]

http://i142.photobucket.com/albums/r95/DCR_88/Image002.jpg
DEFI's waiting 2 go in! (shit phone pic)

But retarded courier company fucked up and lost my sensors and sandwich plate :cry:

Oooooooooooooh, more pics when done. I wanna get the Defi's and hood for my car soon.

[m0nty]

Oh dude!
sandwiched?

Looks like panel only. Saved the cooler by the look of it. If you're gonna have one, it's the way to have it. All panels get replaced and there no major damage to mechanical and structural parts.

[black200]

heard about this last night from tazz :(

thats farking awful jamie soory to see mate :(:(

[Dave R]

Oooooooooooooh, more pics when done. I wanna get the Defi's and hood for my car soon.

Will do buddy!


PyRoMaNiAc: Really sorry 2 see man... hope it all turns out for the best.. hope no1 was injured...

[s_vtec]

aww...noo....RIP BO05TT

[DuGong]

kaotic... damn man.. those lights are looking for trouble...

[arron]

kaotic... damn man.. those lights are looking for trouble...

Most HID's tend to be really blue once they go over the "8000 kelvin" rating.. I'd say it only looks really blue in the photo because of the reflector headlights..

Kin (Kaotic), the reason why my HIDs look so blue is probably bcoz of the projector headlights. A projector (regardless of whether it's from a HID model or not) will focus this light into concentrated beams, therefore providing more light and therefore more blue..

This said, I have to say that aftermarket HIDs really do hurt the on-coming driver's eyes.. Ive seen other dc2r's with HIDs and they really did hurt my eyes.. but then they also look sweet when they flicker from blue to white..

I'm actually thinking of getting a 4500K HID bulb instead.. I love my mum's Euro's HIDs..

[jolt]

What does that mean ? Lol

Skillful is not a word I would use in that sentence ...

Rod

[Justin Fox]

PyRoMaNiAc - :(

[deez]

HKS headers, X-Force hiflow cat, K1 Racing catback. Installed Saturday :)
http://i142.photobucket.com/albums/r119/dereklau_2006/DSC00882.jpg

David and Daniel @ MX5 Mania...welding on the flanges at the cat
http://i142.photobucket.com/albums/r119/dereklau_2006/DSC00883.jpg

I reset the ECU tonite and the car is running rich atm...hope it sorts itself out soon.

[lovesil]

Virgin mod:

http://i3.photobucket.com/albums/y100/lovesil/Own%20Car%20Photos/Ralliart%20Colt/IMG_1772.jpg

[jolt]

Will I haven't done the mod yet but I need some help ...

How can I fit new JDM wheels to the car I share with my wife and ensure that she doesn't gutter rash them?

thanks
Rod

[llama_au]

A lot of tyres have a rim protector lip, they won't prevent guttering but they might stop the little nudge from becoming gutter rash.

[wilch]

Will I haven't done the mod yet but I need some help ...

How can I fit new JDM wheels to the car I share with my wife and ensure that she doesn't gutter rash them?

thanks
Rod

The only way to do this is to buy another car, and stop sharing this one with your wife...

[Rad]

Just teach her to park 30cm from the curb.

[VTECMACHINE]

got a pair of these for the rear:

http://www.powerplayimports.com/repository/1_15_03_2007_16_32_ENDLESS%20CCX.jpg

and...

http://www.upgrademotoring.com/brakes/scr_rotor.jpg

Plus more stuff which I will share with you guys once I can take pics when they are ok my car! :)

[EGG80X]

Will I haven't done the mod yet but I need some help ...

How can I fit new JDM wheels to the car I share with my wife and ensure that she doesn't gutter rash them?

thanks
Rod

you can get those metal antenna thingie which attached to the bottom of the wheel arch hehe

[JDM 20T]

Nothing special just a bit of rice really finally got my plates and changed those crappy clear tail lights for the JDM Black ones :cool:

http://img210.imageshack.us/img210/6283/cimg5042ja5.jpg

[astro]

some new shoes...

http://img.photobucket.com/albums/v700/astro44/box.jpg

[wngo]

^ what a tease!! what's in the box?!

[Kaotic]

BBS rims!!! Painted matt black..

Stickers on rear quater window...

http://img503.imageshack.us/img503/2594/dsc01506rn9.jpg (http://imageshack.us)

[astro]

^ what a tease!! what's in the box?!

hahaha

here is another teaser....front tyre.....

http://img.photobucket.com/albums/v700/astro44/bss03.jpg

[wngo]

^ astro, you are the devil himself! hahah

[dhdevil]

i miss my S-03's!!

[Rad]

http://img210.imageshack.us/img210/6283/cimg5042ja5.jpg

Looks much better than the clear.

[Andy Wana]

Better late than never (pictures taken by Eggbox):

Bride PROS (thanks Philip Lee)
http://i51.photobucket.com/albums/f385/andywana/MX5%20Clubman/IMG_2236.jpg

Buddyclub Racing lug nuts
http://i51.photobucket.com/albums/f385/andywana/MX5%20Clubman/UntitledHDR001.jpg

[Neilus]

Better late than never (pictures taken by Eggbox):

Bride PROS (thanks Philip Lee)
http://i51.photobucket.com/albums/f385/andywana/MX5%20Clubman/IMG_2236.jpg


Win.

[Gorilla]

hahaha

here is another teaser....front tyre.....

http://img.photobucket.com/albums/v700/astro44/bss03.jpg

this guy...."cant afford tyres yet" yhen he rocks up with bridgestone haha

[Rad]

Bride PROS (thanks Philip Lee)

The fixed back comfortable for daily driving (unsure if it's your daily).

[EGG80X]

had to replace the fucked indicator replay

http://i81.photobucket.com/albums/j201/jdmegg/My%20Mx5/IMG_2256.jpg

while i was working on the interior, changed the dash light from OEM green to red

http://i81.photobucket.com/albums/j201/jdmegg/My%20Mx5/IMG_2254.jpg

[2GU UP]

1000000x times better
looks like my audi ;)

[EGG80X]

1000000x times better
looks like my audi ;)

cheers Anthony... I haven't adjusted to it yet keep staring at it while I'm driving lol

[lukecivic]

the red looks good
how did u change them to red, replaced the globes, led conversion or just used the rubber cap things?

[Omawari_San]

New mod on the Impreza, even if it for sale:
http://mitglied.lycos.de/omawari/altmod.JPG
And the new and first mod on the Suzuki Swift daily shitbox.
http://mitglied.lycos.de/omawari/jungmod.JPG

[Bodgy Racing Developments]

http://i21.photobucket.com/albums/b264/bodgybros/My%20EK4/100_7816.jpg

recaros on vision low rails.

big thanks to Yonas for the rails.

[RaYmO]

the red looks good
how did u change them to red, replaced the globes, led conversion or just used the rubber cap things?

Packet of tiny latex caps... You can get a pack from Repco for $5 :D

[RaYmO]

had to replace the fucked indicator replay

http://i81.photobucket.com/albums/j201/jdmegg/My%20Mx5/IMG_2256.jpg

while i was working on the interior, changed the dash light from OEM green to red

http://i81.photobucket.com/albums/j201/jdmegg/My%20Mx5/IMG_2254.jpg

Looks awesome eggy... You doing the rest of the interior? :D

[Oscar]

very nice and economical mod !!love it!

[Philip Lee]

Better late than never (pictures taken by Eggbox):

Bride PROS (thanks Philip Lee)
http://i51.photobucket.com/albums/f385/andywana/MX5%20Clubman/IMG_2236.jpg



tears......

[A'PEXi]

get rid of the stocko steering wheel shak :D nice seats.

[llama_au]

My generous other half is getting me a HKS EVC 5 boost controller for my birthday, it should arrive in a couple of days :D

http://i35.photobucket.com/albums/d159/llama_au/hks_evc_5.jpg

More boosto :D:D:D

[Andy Wana]

The fixed back comfortable for daily driving (unsure if it's your daily).

It is pretty comfortable as a daily drive, but a recliner is definitely more suitable.
The Bride seat is a race bred fixed bucket seat to begin with, so I am not expecting plush lay-z-boy sofa level of comfort and live-ability
Getting in and out can be difficult at times (i.e. narrow multi level parking lots, steep slopes), but so far so good.

On the plus side:

Great driving position and it'll HOLD you firm in place
Top quality leather and stitching (it's like one of those bespoke Italian furniture)
Generous bum width (great in a small cabin like the MX5)

[Andy Wana]

tears......

Don't worry, Philip. I promise to look after the seat well.
And you are more than welcome to have a ride in the 5 if you are in this neck of the woods.

[Perry]

some new shoes...

http://img.photobucket.com/albums/v700/astro44/box.jpg

RE30's?

[Omawari_San]

My generous other half is getting me a HKS EVC 5 boost controller for my birthday, it should arrive in a couple of days :D

http://i35.photobucket.com/albums/d159/llama_au/hks_evc_5.jpg

More boosto :D:D:D
Good piece of electronic. Drive it in the WRX. Was worth every cent! I think the software CD is availlable in english too now.

[llama_au]

I hadn't done much research into it. He's getting one for his S15 and I was looking at a boost controller so he decided it was cheaper to get both at once. It's the bees knees so I'm looking forward to having it installed. Won't be running much boost until the new turbo goes on, remap and possibly an injector upgrade. I should be able to run 12PSI on the standard turbo on the stock ECU.

[black200]

straight pipe!

http://www.youtube.com/watch?v=TZKW1yy6HYc

[Philip Lee]

http://img264.imageshack.us/img264/6117/gtrwu5.jpg

the left is my new "mod" for a little while......

[VTECMACHINE]

http://www.funkystyling.co.uk/images/products/spoon803_02.jpg

My new mod... wOOT!!! Also more in my room! Sooo sooo pumped to put these on :)

[phat_nam]

fuck thats a nice looking shifter! where did you get it from and how much?

[VTECMACHINE]

It's Spoon!!! :)

Got a good price, and got it from somewhere!! :P

[phat_nam]

LOL don't be slack!! tell me~~ please~~

[VTECMACHINE]

PM sent yO!

[patto]

Aww that's so cute! LOL

[Anchor]

Might turn out to be the smartest thing I've ever purchased. HKS Cage:

http://img365.imageshack.us/img365/8485/rollcage1aj8.jpg

[.::F[L]Y::.]

ewd-R sells the spoon Titanium gearknob for 130 delivered. i have had mine for a few months now. beware it scratches easily!!

[Buddy]

good work matt!! awesome mod

[A'PEXi]

post some pics of the cage installed :D

[phat_nam]

PM sent yO!

Thanks for the pm yO!

[EGG80X]

http://i81.photobucket.com/albums/j201/jdmegg/My%20Mx5/IMG_2265.jpg

not so jdm

[nam]

http://img.photobucket.com/albums/v55/namzie/Photo_0022.jpg

finally got some shoes for the whip!

[felixR]

excellent nam :)

[Andy Wana]

http://img264.imageshack.us/img264/6117/gtrwu5.jpg

the left is my new "mod" for a little while......

Skyline GTR32? Nice one! :shock:

[Philip Lee]

Skyline GTR32?

err yes...........

[IcemaN]

http://img.photobucket.com/albums/v55/namzie/Photo_0022.jpg

finally got some shoes for the whip!

helz yehhhh!
lucky they not white otherwise felix would have a twin sister

[J]

Might turn out to be the smartest thing I've ever purchased. HKS Cage:

http://img365.imageshack.us/img365/8485/rollcage1aj8.jpg

damn thats an awesome cage!
not mucking around are we haha

[Omawari_San]

Love the red GTR!!!

[Anchor]

damn thats an awesome cage!
not mucking around are we haha

Only mucking around is trying to get in, it has become apparent where parts of my car are compared to where parts of my car should be. Haha.

[nipnip]

finally got some shoes for the whip!

post pics of em on car!

[A'PEXi]

Only mucking around is trying to get in, it has become apparent where parts of my car are compared to where parts of my car should be. Haha.

just strip the interior while your at it, make things easier :P

[Anchor]

One step ahead of you, all the carpet is gone, sound deadening is going to be removed over the weekend as well, back seat may go back in to make it look a little less dodgy, but rear seat belts have already been removed. :mrgreen:

[gimic]

been a while since i last contributed to this thread. bit of a ricer update really :P
Short Ram intake, Drycell battery setup (re-wired to fusebox & starter while i was at it), heatwrapped my Headers, pissed off the Aircon and put a carbon plug cover on.
http://img519.imageshack.us/img519/4467/picture021nb2.jpg

These Pulse batteries are good value for money. Chopped up a generic battery and re-made + & - while i was at it.
http://img98.imageshack.us/img98/576/batteryxp1.jpg
next up, make and enclosure for the filter and get some bigger brakes! (and yes, i still have to weld a fitting into the intake pipe for the hose coming off the VC

[Dels]

New suspension finally 100% in.
Yellow Koni's and King Springs

http://i119.photobucket.com/albums/o144/Delsi_01/100_1323.jpg
http://i119.photobucket.com/albums/o144/Delsi_01/100_1303.jpg
http://i119.photobucket.com/albums/o144/Delsi_01/100_1309.jpg
http://i119.photobucket.com/albums/o144/Delsi_01/100_1283.jpg
http://i119.photobucket.com/albums/o144/Delsi_01/100_1296.jpg

[WTF-33R]

Carsales 'For Sale Sticker" for my car

[EGG80X]

Carsales 'For Sale Sticker" for my car

best mod ever!

[IcemaN]

nice one delz!!!!!!!

now u need some rims for the girl!

[EGG80X]

prelude whats to come

http://i81.photobucket.com/albums/j201/jdmegg/My%20Mx5/dhd.jpg

[wngo]

^ nice shot !:D

[felixR]

more pics please kelv! hot rims! ;)

[A'PEXi]

airbrushed frontbar? hehhee

[Waggy]

Carsales 'For Sale Sticker" for my car

I've been meaning to ask you this for a while - but is your car maroon?

A maroon r33 tried to play with me on my way into Brisbane one night and I thought it had WTF on the plates.... I was weighed down with weekend bags and about 200kgs of car parts!

[Zilvia]

new shoez
http://i78.photobucket.com/albums/j104/Zilvia13/Our%20cars/DSC00006.jpg
http://i78.photobucket.com/albums/j104/Zilvia13/Our%20cars/DSC00013.jpg

and new knob
http://i78.photobucket.com/albums/j104/Zilvia13/Our%20cars/DSC03584.jpg
http://i78.photobucket.com/albums/j104/Zilvia13/Our%20cars/DSC03586.jpg

[black200]

New suspension finally 100% in.
Yellow Koni's and King Springs

http://i119.photobucket.com/albums/o144/Delsi_01/100_1323.jpg
http://i119.photobucket.com/albums/o144/Delsi_01/100_1303.jpg
http://i119.photobucket.com/albums/o144/Delsi_01/100_1309.jpg
http://i119.photobucket.com/albums/o144/Delsi_01/100_1283.jpg
http://i119.photobucket.com/albums/o144/Delsi_01/100_1296.jpg

nice work! looks great. should handle a treat :D

[Dave R]

http://i142.photobucket.com/albums/r95/DCR_88/BDI55Ny0.jpg

NSW REGO Y0! Lol.. YAY! thats one thing of my back now... feel so much better now that this is done!
(yer i know they are real lame plates 'B Dissn' LOL, but its the plates they gave me over the counter - i just went for the premium over ugly yellow plates)

Now for the real hardcore mods :twisted:

[Dels]

nice one delz!!!!!!!

now u need some rims for the girl!

Yea definately, was thinking p1's


nice work! looks great. should handle a treat :D

Yea it does. Pitty the front treads are bald!!

[lionhart87]

My Teins Super Compacts as soon as i received it
http://i172.photobucket.com/albums/w4/lionhart87/DSC00767.jpg

http://i172.photobucket.com/albums/w4/lionhart87/DSC00769.jpg

Now Fitted
http://i172.photobucket.com/albums/w4/lionhart87/DSC00775.jpg

[nam]

post pics of em on car!

the missus' handy photography skills
http://img.photobucket.com/albums/v55/namzie/DSCN0693.jpg

http://img.photobucket.com/albums/v55/namzie/DSCN0695.jpg

[TGZ80Y]

very nice...........nam.

[luxury_lowrider]

the missus' handy photography skills
http://img.photobucket.com/albums/v55/namzie/DSCN0693.jpg

http://img.photobucket.com/albums/v55/namzie/DSCN0695.jpg
that looks dope!
love your ride!

[kawasaki]

I love the look of 16" regamasters so nice!

[felixR]

go nam!!

talk about regas.. i saw an MX6 in the city with white regas >_<

[Gorilla]

yep looks great Nam, also Kelv car looks good....

[De_Cruelz]

Nam, time for another photoshoot it seems! :)

[DuGong]

i saw this car passing my work plce in cabramatta on john st.. a chick was driving it... nice wheels btw..

[felixR]

Nam, time for another photoshoot it seems! :)
with all the other JDM fronts! :P

[Evan]

http://i215.photobucket.com/albums/cc120/EDGEDAZZA/ae862038.jpg

http://i215.photobucket.com/albums/cc120/EDGEDAZZA/ae862037.jpg

my latest mod is making a mess lol

[Buddy]

this better be ready by the ae86 annual or im going to beat u with a stick