View Full Version : 7M-GTE Ignition
The Panda
11-10-07, 03:52 PM
Hey everyone,
My friend has just shoehorned a 7mgte into his MA70 supra. Anyway, apparantly he is missing : Ignitor or ignition coil? Not sure exactly what this is but could anyone here help me to find one? Thanks
Gorilla
11-10-07, 05:34 PM
Should be the same as other toyotas. I remember i used my IS200 one on a 1jzgte motor....
^^ Would require a different wiring loom and likely also confuse the crap out of the ECU
project2
12-10-07, 05:37 AM
A standard "GE" spec might not work.. but I believe the 7MGTE has a cam positioning sensor on it.
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/IG/IG_004.gif
It uses a DLI (dizzy less ignition system/coil packs) vs the 7MGE. Where the 7MGE dizzy would go there is a rotor cap to connect the leads.
7MGTE
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/IG/IG_021.gif
vs 7MGE
http://www.cygnusx1.net/Supra/Library/TSRM/MK3/IG/IG_017.gif
Find out if his missing this (I highly doubt.. I dont think they remove the DLI's,) or the Coil packs which should sit ontop of the engine
The DLI is mainly interchangable with toyota and since its stock DLI setup. All you need todo is get the correct timing and positioning of the cam sensor otherwise it will run rough, miss and you may miss out on power.
As for the coil packs, This is out of my Area.. I had a GZE DLI setup before.. but my current engine is still plain dizzy so its out of my knowledge. The best bet is - Try to source a Inline 6 toyota one, 1JZ, 2JZ, 7M the modern GTE style engines should be ok
If they are going to run aftermarket ecu instead then any coil packs can be installed to suite the ECU
http://www.z2soarer.info/assests/7m-engine-parts/coilpack.jpg
If you need parts these guys are good - Andrew Vibert - http://www.cvap.com.au/
If you aren't already on toymods, join www.toymods.net Not many people on here are technical/hands on guys so you wont get a decent answer.
The Panda
12-10-07, 10:17 AM
sweet, thanks heaps guys :)
Gorilla
12-10-07, 10:23 AM
huh, isnt he talking bout the ignitor?
http://www.the-ecu-doctor.co.uk/Toyota%20Supra%20Igniter.jpg
I have a solution! Swap out the 7M-BHG, and slot in a 1JZ setup :D
Hey everyone,
My friend has just shoehorned a 7mgte into his MA70 supra. Anyway, apparantly he is missing : Ignitor or ignition coil? Not sure exactly what this is but could anyone here help me to find one? Thanks
your friend should probably get himself onto toymods.net there is alot of useful help on there and im sure someone would have a spare of whatever he needs on there
project2
15-10-07, 06:41 AM
^^ Like I said, toymods is technical and usefull. Their actually hands on guys
www.toymods.net
CaptainColen
24-10-07, 09:20 PM
Wow thats a pretty clever system in the gte. I knew they didnt have a distributor, but i never knew they had some fancy kind of induction coil setup for ignition and cam position sensor... the stuff headaches are made of
That's the igniter alright, hit up some japanese wreckers matey.
around $70 mark, although i've seen some sell for $150 !!
Powered by vBulletin™ Version 4.0.8 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.