Bronze
Charcoal
Nickel
Tungsten
They are finally coming.
Arriving in May! 949Racing 6ULR 17? Wheels!
The first shipment will have limited stock so get in fast as colours will sell out quickly.
http://www.mx5centre.com.au/index.ph...index&cPath=78
To suit the RX8, Sti, Mazda 3, NC MX5, etc:
17x9 +48 $375 Each
To suit the wrx, etc:
17x9 +48 $375 Each (5x100) (Tungsten Only)
For the S2000 and NSX:
17x9 +63 $375 Each
17x10 +72 $425 Each
17x10 +52 $425 Each
Charcoal (17x9 and 17x10)
Nickel (17x9 and 17x10)
Tungsten (17x9 Only)
Bronze (17x9 +48 5x114.3 Only)
Specifications:
? 17x9
? +63 or +48 offset
? 17.0 lbs / 18.0 lbs
? Low pressure cast - Flow Formed outer rim - Monoblock construction
? T6 heat treated
? Brake clearance for Wilwood 12.9" Dynapro/Dynalite
? 72.1mm center bore
? Double valve design
? JWL approved
? Charcoal black, durable matte clear coated finish
? Cap included
Fits 225/45, 225/50, 235/40, 235/45, 245/40, 245/4, 255/40, 275/35, 275/40 tires. Valves not included.
? 17x10
? +72 or +52 offset
? 18.0 lbs / 19.0lbs
? Low pressure cast - Flow Formed outer rim - Monoblock construction
? T6 heat treated
? Brake clearance for StopTech 328mmm/12.9" - Amuse/Endless/J's Racing
? 72.1mm center bore
? Double valve design
? JWL approved
? Charcoal black, durable matte clear coated finish
? Cap included
Fits 255/40, 275/35, 275/40 tires. Valves not included.
Last edited by Tracksformations; 22-04-10 at 07:06 PM.
Reply With Quote
Bronze
Charcoal
Nickel
Tungsten
Last edited by Tracksformations; 22-04-10 at 07:07 PM.
Reply With Quote
+72
anything a bit less like 17x10+20
Reply With Quote
Yeah the 17x10 5x114.3 +72 is just for the S2000 and NSX guys. They are primarily a rear wheel race offset to allow max tyre width without destroying the bodywork. But not much use for other make and models.+72
anything a bit less like 17x10+20
949Racing are developing other offsets for later in the year and next year.
MX5Centre
Reply With Quote
when will the 17 x 10 +52 actually be available? It's been a long time coming. You guys being based in VIC what's the damage to get them shipped to Sydney.
Reply With Quote
The wheels should be in Melbourne by this time next month. Postage to Sydney/Adelaide will be $65 for the set, Brisbane $75.
Send me an email for quotes to any other areas.
Reply With Quote
would 17x9 fit nissan xtrail t30? if so what offset?
Reply With Quote
The stud pattern will fit the X-Trail but i dont know about the guard and strut clearances. You would need to do some measuring to be sure.Originally Posted by lil filo
MX5Centre
Reply With Quote
The 17's are finally on the water. Due the first week of july.... Sorry for the delay to all those who have ordered.
To summarise the sizes and colours still available:
5x114.3
17x9 +48 - Bronze Tungsten Charcoal Nickel (Mazda 3, Mazda 6, NC MX5, RX8, Sti, RX7, etc)
17x9 +63 - Tungsten Charcoal Nickel (S2000, NSX)
17x10 +72 - Charcoal Nickel (S2000, NSX)
17x10 +52 - Charcoal (S2000, NSX)
5x100
17x9 +48 - Tungsten (WRX)
Free Delivery on all pre-orders will be exteneded until 31st May 2010.
Reply With Quote
A few pictures of the pre production samples mounted up...
