Hi Everyone

Over on the S2000 facebook page on the weekend, some of us were having a discussion on camber arms.. I thought I would share some of the info I gathered for any S2000 owners out there interested in rear camber arms for their car.

Hardrace S2K Rear camber arms have locking groove, and use 12.9 grade bolts. The spherical bearing construction is made up of 3 layers including an integrated dust boot and sleeves. Its one complete unit compared to say your traditional spherical bearing/ rose joint type, that has the centre bearing with individual sleeves that push into the centre ( this part guide the bolt through the bearing). Materials used to construct the spherical bearing includes a chromoly alloy steel outer ring, its inner linings contains a phosphor bronze and teflon for it toughness, low coefficient of friction, the actual ball bearing itself is a carbonised chromoly steel ball bearing.

S2000 rear camber arms link: http://www.hard-race.com.au/index.ph...path=20_67_308