Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: Reggie's S15

  1. #21
    New Member 15LIP's Avatar
    Join Date
    Apr 2008
    Location
    T-Ba QLD
    Posts
    88

    A few pics now that wheel alignment is sorted!





    and an interior shot with the new floor mats:
    Last edited by 15LIP; 27-11-19 at 11:59 AM.
  2. #22
    New Member 15LIP's Avatar
    Join Date
    Apr 2008
    Location
    T-Ba QLD
    Posts
    88

    A few new bits and peices to update!

    Took the rocker cover off for paint, modified to accommodate the new Tomei rocker arm stoppers and gave it a good clean out:


    This took some cleaning!


    Finished painted rocker cover:
    Colours are phantom mica and hotter than pink mica with polished letters



    Fitted back up after installing rocker arm stoppers, along with a modern metal coil pack cover:
    Last edited by 15LIP; 27-11-19 at 01:56 PM.
  3. #23
    New Member 15LIP's Avatar
    Join Date
    Apr 2008
    Location
    T-Ba QLD
    Posts
    88

    Next up:
    - Garrett GTX2867r Gen 2 .64 w/ Turbosmart Wastegate / 16psi Actuator
    - Plazmaman 800x600x300 Core with Custom Stainless piping, Turbosmart clamps
    - Stainless intake pipe
    - HKS SSQV IV BOV
    - Bosch Z32 AFM
    - Apexi Pod Filter
    - Nismo 740cc Injectors
    - Walbro 255 Fuel Pump
    - ORC 409D Single Plate Clutch kit
    - Apexi Power FC



    Old vs New


    Stock clutch removed

    New Clutch:



    Turbo removal / fit




    Intercooler



    Being an ADM, i had to re-pin the ECU connector to suit the power FC
    Moved pin 106 to 104 (104 was spare, so nothing removed from it) for the fuel pump relay
    and swapped pins 30 and 31 with eachother for CAS


    SSQV Mounted down behind the front bumper



    All finished:
  4. #24
    New Member 15LIP's Avatar
    Join Date
    Apr 2008
    Location
    T-Ba QLD
    Posts
    88

    Went in for a tune last Tuesday 19/11/19

    The boost controller (turbo tech) wasn't working too well, so currently running actuator pressure 16psi



    Pretty happy with the power at the moment! The plan from the start was streetable power with plenty of headroom. Will most likely go down the EBC route and run a little bit more
  5. #25
    Member Modified's Avatar
    Join Date
    Nov 2007
    Location
    Sydney, NSW
    Daily
    Mitsi Outlander
    2nd Car
    BNR32
    Posts
    1,688

    Nice result! Why did you choose PowerFC over the other options? Tuners preference?

    Love the wheel choice as well, looks the business
  6. #26
    New Member 15LIP's Avatar
    Join Date
    Apr 2008
    Location
    T-Ba QLD
    Posts
    88

    Quote Originally Posted by Modified View Post
    Nice result! Why did you choose PowerFC over the other options? Tuners preference?

    Love the wheel choice as well, looks the business
    Thanks man! Yeah I love the VSXX (obviously - being my second set on an S15)

    Went with the PowerFC purely because I have had them on 2 previous Silvias. Never had a problem with them, everything works, cold start and idles great (not saying others can't do that either). Well priced, plug and play and for what i wanted to gain from the S15, it suited perfectly
  7. #27
    New Member
    Join Date
    Apr 2012
    Location
    SA
    Daily
    Golf R Variant
    2nd Car
    Fiat Panda (Srsly!)
    Posts
    72

    Man I really like your rocker cover. Super clean car - modified but unassuming. Keep up the great work!
Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •